Français

NASA will demonstrate laser communications from the space station

204
2023-09-02 14:36:58
Voir la traduction

NASA's ILLUMA-T payload communicates with the LCRD via laser signals.

NASA uses the International Space Station, a spacecraft the size of a football field orbiting the Earth, to learn more about living and working in space. For more than 20 years, the space station has provided a unique platform for investigation and research in the fields of biology, technology, agriculture and more. It is home to astronauts conducting experiments, including improving NASA's space communications capabilities.

In 2023, NASA will send a technology demonstration called the Integrated LCRD Low Earth Orbit User Modem and Amplifier Terminal (ILLUMA-T) to the space station. ILLUMA-T and the Laser Communications Relay Demonstration (LCRD), launched in December 2021, will together complete NASA's first two-way end-to-end laser relay system.

With ILLUMA-T, NASA's Space Communications and Navigation (SCaN) Program Office will demonstrate the power of laser communications on the space station. Laser communication systems use invisible infrared light to send and receive information at higher data rates. With higher data rates, missions can send more images and videos back to Earth in a single transmission. Once installed on the space station, ILLUMA-T will demonstrate the benefits of higher data rates for low-Earth orbit missions.

"Laser communications provide missions with greater flexibility and a fast way to get data from space," said Badri Younes, former deputy deputy administrator for the NASASCaN program. "We are integrating this technology into demonstrations near the Earth, on the moon and in deep space."

In addition to higher data rates, laser systems are lighter and consume less power, a key advantage when designing spacecraft. ILLUMA-T, which is about the size of a standard refrigerator, will be attached to the station's external module for demonstration with the LCRD.

Currently, LCRD is demonstrating the benefits of laser relay in geosynchronous orbit, 22,000 miles above Earth, by transmitting data between two ground stations and conducting experiments to further refine NASA's laser capabilities.

"Once ILLUMA-T is aboard the space station, the terminal will send high-resolution data, including pictures and video, to the LCRD at a rate of 1.2 gigabits per second," said Matt Magsamen, ILLUMA-T deputy program manager. "The data will then be sent from LCRD to ground stations in Hawaii and California. The demonstration will show how laser communications can benefit low-Earth orbit missions.

NASA's Laser Communication Roadmap: Demonstrating laser communication capabilities across multiple missions in a variety of space conditions. Source: NASA/Dave Ryan

ILLUMA-T was launched as a payload on SpaceX's 29th commercial resupply services mission for NASA. For the first two weeks after launch, ILLUMA-T will be removed from the trunk of the Dragon spacecraft and installed on the station's Japan Experimental Module Exposure Facility (JEM-EF), also known as "Kibo" - which means "hope" in Japanese.

After the payload is installed, the ILLUMA-T team will conduct initial testing and on-orbit inspections. Once completed, the team will pass the payload's first light - a key milestone as the mission transmits its first laser beam to LCRD through its optical telescope.

Once the first light is reached, data transmission and laser communication experiments will begin and continue throughout the planned mission period.

Test lasers in different scenarios

In the future, operational laser communications will complement radio frequency systems, which are used by most space-based missions today to send data home. ILLUMA-T is not the first mission to test laser communications in space, but brings NASA closer to an operational injection of the technology.

In addition to LCRD, ILLUMA-T's predecessors include the 2022 TeraByte Infrared Transmission system, which is currently testing laser communications on small Cubesats in low Earth orbit; Lunar laser communication demonstration to send data to and from lunar orbit and Earth during the Lunar Atmosphere and Dust Environment Explorer mission in 2014; As well as the 2017 Optical payload for Laser Communication Science, the model demonstrates how laser communication speeds up the flow of information between Earth and space compared to radio signals.

Testing the ability of laser communications to generate higher data rates in a variety of scenarios will help the aerospace community further refine the capabilities of future missions to the moon, Mars and deep space.

Source: Thepaper.cn

Recommandations associées
  • Tiedra Famaceutica uses Macsa ID's SPA2 CB laser marking system

    Tiedra Famaceutica was founded by members of the Tiedra family in 2003 and is a manufacturer of contact lenses, health and ophthalmic products, as well as diagnostic instruments used in optometry and ophthalmic clinics.Before installing the SPA2 CB laser model for Macsa id, Tiedra used a pantograph, which is a quadrilateral system composed of hinged rods. This manual process provides limited marki...

    2023-12-14
    Voir la traduction
  • Cambridge University researchers use lasers to "heat and strike" 3D printed steel

    According to the University of Cambridge, researchers have developed a new method for 3D printing metal, which can help reduce costs and more effectively utilize resources. This method, developed by a research team led by the University of Cambridge, allows structural modifications to be "programmed" into metal alloys during 3D printing - fine-tuning their performance without the need for thousand...

    2023-11-03
    Voir la traduction
  • Snapmaker Announces Its First Dedicated Laser Cutter, the Ray, in 20w and 40w Flavors

    Snapmaker has been making three-in-one manufacturing tools -- The Snapmaker, Snapmaker 2 and Artisan -- for over six years now. These machines have changeable tool heads that can be used for 3D printing, laser cutting and CNC machining. At the beginning of this year, it branched out to make adedicated 3D printer, the J1-- a dual print-head machine that works very well -- and today the ...

    2023-08-28
    Voir la traduction
  • Redefining optical limits: Engineers discover enhanced nonlinear optical properties in 2D materials

    Recently, according to a paper published in Nature Communications titled "Phonoenhanced nonlinearities in hexagonal boron nitride," engineers from Columbia University collaborated with theoretical experts from the Max Planck Institute of Material Structure and Dynamics to discover that pairing lasers with lattice vibrations can improve the nonlinear optical properties of layered two-dimensional ma...

    2024-02-23
    Voir la traduction
  • Mirico successfully raised $2 million with unique laser dispersion spectroscopy technology

    In the field of high-performance gas sensing intelligence, Mirico stands out with its unique laser dispersive spectroscopy (LDS) technology, successfully raising $2 million in the latest round of financing.Recently, Mirico announced this good news. This financing is led by Shell Ventures and New Climate Ventures, with support from the UK Innovation and Science Seed Fund (UKI2S) and other existing ...

    2024-06-28
    Voir la traduction