chanelink logo
CHANELINK
Français

The visual LiDAR fusion calibration board improves the detection accuracy of the vehicle navigation system and does not need to be adjusted before sailing

558
2023-08-23 14:12:19
Voir la traduction
At present, the navigation system has become an important equipment on ships, aircraft, missiles, automobiles and other navigational vehicles. Laser Doppler radar has become an important development direction in the field of velocity measurement technology because of its high accuracy, good spatial resolution and fast dynamic response.
 
The application of the three-beam Doppler Lidar in the vehicle navigation system can continuously measure the navigation parameters of the vehicle relative to the ground, such as three-dimensional axial speed and instantaneous position, and realize the autonomous navigation, and it does not need to be adjusted before sailing, and it is simple and convenient to use.

With the continuous improvement of the detection performance of multi-beam radar such as SNR and velocity sensitivity in engineering applications, more in-depth research on beam configuration is needed. The vehicle-mounted three-beam Doppler Lidar beam is illuminated by a combined transceiver antenna. Whether direct detection or coherent detection is used, it is desirable to obtain a large echo signal intensity.
 
However, in the actual measurement process, the intensity of the echo signal is greatly attenuated because of light scattering on the rough surface. The bidirectional reflection distribution function (BRDF) of a rough surface can describe not only the optical radiation properties of the surface, but also the directional scattering properties.

Three beam Doppler Lidar uses continuous wave laser for optical mixing (homodyne detection) measurement. After the signal light transmitted by liDAR in the atmosphere, the echo signal and the local oscillator signal of the system generate the difference frequency signal through the optical mixer. When the local oscillator frequency is equal to the emitted laser frequency, the difference frequency is the Doppler shift of the echo signal.

When the three-beam laser illuminates the ground at an oblique Angle, the different beam illumination Angle will cause the different working distance of the beam, which will affect the signal-to-noise ratio of the system. If the installation height of the three-beam antenna is H, the working distance of the beam is R=H/sinα. The SNR of the system monotonically increases with the increase of the remaining zenith Angle. When the signal-to-noise ratio of coherent laser radar is higher than 8dB, the estimated maximum likelihood reaches the Kramerlau lower bound (CRLB).

When the system hardware parameters and algorithms are selected, the sensitivity of velocity measurement is only related to the zenith Angle and decreases with the increase of the zenith Angle. Speed measurement sensitivity can not be too small, otherwise the instrument will fail to respond to the operating speed, usually need to give the practical application of speed measurement sensitivity or can be converted to the index requirements.

Hangxin photoelectric laser radar calibration plate has good stability and can obtain repeated accurate data. Suitable for automatic driving distance, identification testing and remote sensing targets and other fields, the reflectivity is 1-99% optional, does not drop powder and does not change yellow, with nearly perfect Lambert characteristics. Hangxin photoelectric diffuse reflector adopts exclusive spraying process, which can provide a variety of reflectivity splicing diffuse reflector for seamless splicing.

Source: Sohu
Recommandations associées

  • Progress has been made in the research of phase modulation of terahertz programmable metasurfaces based on free carrier plasmonic dispersion effect

    Recently, the team of Situ Guohai and Guo Jinying from the Aerospace Laser Technology and Systems Department of the Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, and the School of Microelectronics at Shanghai University collaborated to propose a terahertz phase controlled programmable metasurface design scheme based on free carrier plasma dispersion effect. The rela...

    2024-07-26
    Voir la traduction

  • The company has made key breakthroughs in the development of laser micromachining systems

    3D-Micromac AG, a provider of laser micromachining systems, has announced new advances in laser micromachining solutions for magnetic sensors, micro-leds, manufactured power devices and advanced packaging of semiconductors.Since the first working laser came out more than 60 years ago, lasers have been widely used in the industrial market. Uwe Wagner, CEO of 3D-Mircomac, said: "In the semic...

    2023-08-04
    Voir la traduction

  • Dutch satellite instruments have achieved milestone achievements in transmitting laser data to Earth

    TNO wrote that this is the first time Dutch technology has been used to send data from a satellite to a ground station press release on Earth. This technology uses invisible laser signals to achieve faster and safer data flow compared to ubiquitous communication radio frequencies.Kees Buijsrogge, Director of TNO Space, said, "This critical milestone marks a significant achievement for the Netherla...

    2024-01-25
    Voir la traduction

  • MIT research enables 3D printers to recognize new materials

    According to scientists at MIT, mathematical formulas developed by MIT researchers and other institutions can significantly improve the sustainability of 3D printing.Issues with 3D printing of plastics3D printers typically use mass-produced polymer powders to print parts, which are consistent and predictable, but also difficult to recycle.Other more environmentally friendly options also exist and ...

    2024-04-18
    Voir la traduction

  • Breakthrough 8-channel 915nm SMT pulse laser, ushering in a new era of laser radar applications

    The 8-channel 915nm SMT pulse laser can enhance the long-range laser radar system of autonomous vehicle;An 8-channel QFN package certified by AEC-Q102, featuring high performance and efficiency, utilizing proprietary wavelength stabilization technology from AMS Osram;Based on over 20 years of experience in pulse laser technology.Shanghai, China, August 8, 2024- AMS, a leading global optical soluti...

    2024-08-09
    Voir la traduction