Français

Allocate 10 billion US dollars! New York State to Build NA Extreme UV Lithography Center

770
2023-12-15 13:57:53
Voir la traduction

On December 11th local time, New York State announced a partnership with companies such as IBM, Micron, Applied Materials, and Tokyo Electronics to jointly invest $10 billion to expand the Albany NanoTech Complex in New York State, ultimately transforming it into a high numerical aperture extreme ultraviolet (NA EUV) lithography center to support the development of the world's most complex and powerful semiconductors.

This new factory, covering an area of 50000 square feet, will begin construction in 2024. A $10 billion investment is expected to help build North America's first and only publicly owned high numerical aperture extreme ultraviolet (NA EUV) lithography center.

It is reported that the new factory is expected to further expand in the future, which will encourage growth in future partners and support new initiatives such as the National Semiconductor Technology Center, the National Advanced Packaging and Manufacturing Program, and the Department of Defense's Microelectronics Sharing Program.

High numerical aperture extreme ultraviolet (NA EUV) lithography technology is the key to the manufacturing of next-generation (2nm and below) cutting-edge process chips. The collaboration between New York State and major semiconductor companies in the United States and Japan to establish the High-NA EUV semiconductor research and development center is mainly aimed at helping local American manufacturers further enhance their design and manufacturing capabilities in the field of cutting-edge semiconductor processes. They hope to obtain financial support through the Chip Act. State government officials have also provided incentives for these manufacturing facilities.

The statement shows that NY Create, a non-profit organization responsible for coordinating the construction of the facility, is expected to use $1 billion in state government funds to purchase TWINSCAN EXE: 5200 lithography equipment from ASML. Once the device is installed, relevant partners will be able to start researching the next generation of chip manufacturing. The plan will create 700 jobs and bring in at least $9 billion in private investment.

According to the plan, NY CREATES will purchase and install high numerical aperture extreme ultraviolet (NA EUV) lithography tools designed and manufactured by ASML. The instrument is equipped with a technology in which the path in the laser etching circuit exceeds the ultraviolet spectrum on a micro scale. Ten years ago, this process was the first to etch channels for 7-nanometer and 5-nanometer chip processes, and currently has the potential to develop and produce chips with nodes smaller than 2 nanometers - as early as 2021, IBM overcame this obstacle.

The EUV machines currently used in the market and industry are unable to generate the resolution required for sub 2nm nodes, in order to facilitate large-scale production and make them into chips. According to IBM, although current machines can provide the necessary level of accuracy, they require three to four EUV light exposures instead of one exposure. The increase in high NA can create larger optical devices and support printing higher resolution patterns on wafers.

Although researchers need to consider the issue of shallower focusing depth caused by increased aperture, IBM and its partners believe that this technology can drive the adoption of more efficient chips in the near future.
In terms of talent, the plan also includes collaborating with State University of New York to support and build talent development channels.

Source: OFweek

Recommandations associées
  • 2Pi Optics has launched a new type of fisheye camera based on its so-called metasurface optics

    2Pi Optics has launched a new type of fisheye camera based on its so-called metasurface optics.The company plans to showcase this technology at the large-scale technology trade show CES 2024 in Las Vegas next week.This company, headquartered in Cambridge, Massachusetts, stated that it has created the world's leading high-resolution fisheye sensor based on optical superlens technology. This technol...

    2024-01-05
    Voir la traduction
  • Chinese researchers have developed for the first time a room temperature HoYLF thin film laser

    In a study published in Optics Express, the research team led by Professor Fu Yuxi of the Xi'an Institute of Optics and Precision Mechanics (XIOPM) of the Chinese Academy of Sciences developed the room temperature holmium doped lithium yttrium fluoride (Ho: YLF) composite thin slice laser for the first time, which can achieve high efficiency and high-quality CW laser output.Laser devices operating...

    02-21
    Voir la traduction
  • AMCM 8 laser M 8K metal 3D printing equipment is about to be launched, equipped with 8 lasers

    In October 2023, Germany's AMCM (EOS, a global technology leader in industrial grade additive manufacturing) announced the upcoming launch of the M 8K metal 3D printing equipment. The device will be equipped with 8 lasers, with a construction volume of 800 x 800 x 1200 millimeters, nearly four times the size of AMCM's previously launched M 4K metal 3D printing device on the market.ArianeGroup's ho...

    2023-10-19
    Voir la traduction
  • 253 million US dollars! This Canadian medical fiber optic sensor manufacturer will be acquired

    Recently, Haemantics Corporation, which focuses on providing innovative medical solutions with proprietary optical technology, announced that the company has reached a final agreement. According to the agreement, Haemonics will acquire all outstanding shares of Canadian fiber optic sensor manufacturer OpSens for CAD 2.90 per share.This is an all cash transaction with a fully diluted equity value o...

    2023-10-18
    Voir la traduction
  • The 3D toy printer is easy to use and safe, perfect for children and adults

    Children (and adults) like to collect toys, but what if they can make them themselves? This is exactly the focus of the Toybox 3D printer luxury bundle. This 3D printer for children's toys incorporates innovative technology into simplified products, making it very suitable for young people. Do you want to have your own? The cost of this 3D toy printer has been reduced to $348.99.Generally speaking...

    2024-06-05
    Voir la traduction