Français

SPIE Optics and Photonics 2025: Kyle Myers from Puente elected as SPIE Chair

13
2025-08-08 14:26:09
Voir la traduction

The founder and principal of Puente Solutions Kyle J. Myers has been elected to serve as the 2026 Vice President of SPIE, the international society for optics and photonics. With her election, Myers joins the SPIE presidential chain. She will serve as president-elect in 2027, and as the Society’s president in 2028.

 



Newly-elected: Myers, McNally, Rubinsztein-Dunlop, Wade, Medicus, and Erdmann


The 2025 SPIE President Peter de Groot, Zygo Corp. scientist emeritus, made the announcement along with other SPIE election results at this year’s Annual General Meeting of the Society on 5 August, during SPIE Optics + Photonics, in San Diego. Terms begin on 1 January 2026.

Myers, founder and principal at Puente Solutions, is also currently a fellow at the Hagler Institute for Advanced Study at Texas A&M University. Her areas of technical research across her career in government, industry, and academia have included medical imaging and biomedical optics; signal processing and AI/ML; vision science and perception; and technical translation from ideation to market authorization.

From 1987 until 2021, Myers worked at the FDA’s Center for Devices and Radiological Health; her final role there was as Director of the Division of Imaging, Diagnostics, and Software Reliability.

An SPIE Fellow, Myers was the recipient of the 2024 SPIE Harrison H. Barrett Award in Medical Imaging, and a 2006 recipient of the Joseph W. Goodman Book Writing Award. She sits on the Society’s Strategic Planning Committee and its Publications Committee. From 2018-2023, she served on the SPIE Board of Directors.

She has participated as an SPIE Awards Program Chair, an associate editor for the Journal of Medical Imaging, and, from 1996-2005, as part of the program committee for the Image Processing Conference at SPIE Medical Imaging. Myers is currently on the program committee for the Image Perception, Observer Performance, and Technology Assessment conference at SPIE Medical Imaging. She is also a fellow of AAPM, AIMBE, and Optica, and a member of the National Academy of Engineering.

Myers was featured in the 2014 SPIE Women in Optics Planner where she stated: “I have devoted my career to advancing approaches for evaluation of medical imaging devices from a subjective practice to an objective and quantitative science; my lab develops methods for evaluating novel medical imaging devices and provides independent, objective data regarding device performance.”
“This is a type of lab science that is not done elsewhere. It is extremely rewarding to have a research job that is concretely assisting in getting new medical products to patients as quickly as possible, based on solid scientific evidence of their benefits.”

“Through SPIE we are working for more than the advancement of optics and photonics technologies — we are working for the betterment of the human condition,” said Myers. “I look forward to serving SPIE as we work together to do even more to educate, empower, grow, and support optics and photonics professionals around the world.”

Other SPIE electees

Alongside Myers, University of Rochester Professor Julie Bentley will serve as the 2026 SPIE President while Cather Simpson of the University of Auckland and Orbis Diagnostics, will serve as President-Elect. Jim McNally, CEO of StratTHNK Associates, was elected to serve as the 2026 SPIE Secretary/Treasurer.

The following newly-elected Society Directors will serve three-year terms from 2026-2028:

Halina Rubinsztein-Dunlop, professor of physics at the University of Queensland and deputy director of the Australian Research Council’s Center of Excellence in Quantum Biotechnology.
Jessica Wade, research fellow and lecturer at Imperial College London.
Kate Medicus, CEO and owner of Ruda Optical.
Rainer Erdmann, CEO and founder of PicoQuant.

The SPIE nominating committee accepts recommendations for the election slate on an ongoing basis. Directors, who serve a three-year term, are expected to attend and participate in three board meetings each year.

Source: optics.org

Recommandations associées
  • The Future of Data Center Communication: Quantum Dot Semiconductor Comb Laser

    In the constantly evolving field of technology and data communication, researchers have made significant breakthroughs: developing a continuous wave O-band quantum dot semiconductor comb laser for wavelength division multiplexing optical interconnection. With its impressive performance characteristics, this development is expected to completely change the way we manage and transmit data, especiall...

    2024-02-21
    Voir la traduction
  • Underwater laser cutting has been achieved with several advantages over common technologies such as saws, automatic wire saws and plasma cutting machines

    Due to the growing demand for renewable energy, the need for modern technologies to dismantle existing underwater infrastructure is also growing.For example, in order to boost the power of an offshore wind farm to a higher level, the existing old steel frame, which may be below sea level, must first be removed so that engineers can rebuild the steel frame for higher power.In laboratory tests, rese...

    2023-09-13
    Voir la traduction
  • Laser additive manufacturing: monitoring during defect occurrence

    Researchers at the Federal Institute of Technology in Lausanne have resolved the long-standing debate surrounding laser additive manufacturing processes through a groundbreaking defect detection method.The development of laser additive manufacturing is often hindered by unexpected defects. Traditional monitoring methods, such as thermal imaging and machine learning algorithms, have shown significa...

    2023-12-06
    Voir la traduction
  • Using laser welding technology to manufacture rotor shafts at the speed of light

    How can EMAG Laser Technology accelerate the production of critical powertrain components using its flagship product ELC 6 system?The rapid popularity of electric vehicles worldwide indicates that production planners must increase their efforts in producing key components of electric vehicles, particularly the rotor shaft. The importance of the rotor shaft as the core component for converting elec...

    2024-07-17
    Voir la traduction
  • Reverse Modeling of 3D Scanning Reading in Hong Kong: Production Innovation in the Digital Era

    In the wave of the digital age, Hong Kong, as an international business center, constantly explores the application of new technologies in the manufacturing industry. Among them, 3D scanning and reverse modeling technology is emerging, bringing a new production innovation to the manufacturing industry. This article will explore the application of 3D scanning and reverse modeling in Hong Kong, as w...

    2024-03-30
    Voir la traduction