RDC6612U controller virtual array graphics downloaded to panel positioning processing position error

When using the RDC6612U controller, encountering the problem of incorrect positioning of the virtual array graphics after downloading to the panel may be caused by various factors. To solve this problem, you can follow the steps below to troubleshoot one by one:

1. Check software parameters
   Ensure that all the relevant software parameters are set correctly, especially those related to the virtual array. Verify the coordinate system settings, alignment method, and processing area to ensure they match the actual requirements. Also, make sure there are no errors in the reference coordinates or dimension settings when designing the graphic, as incorrect settings can cause the graphic to be misaligned on the panel.

2. Is the software version a non-standard one?
   Confirm that the software version being used is a standard version, as non-standard versions might have compatibility issues with the hardware controller. Non-standard software may not have been fully validated, leading to instability or incompatibility, which can cause issues with the virtual array function. It is recommended to update or switch to a standard software version to ensure compatibility with the controller.

3. Is the graphic file abnormal?
   Before downloading the virtual array graphic, check if the graphic file is intact and free from corruption or missing data. In some cases, excessively complex graphic files or files with unnecessary details (such as too many nodes or non-standard paths) can cause misalignment during the download process. Use professional software to inspect the file and ensure it is complete, avoiding file issues that could lead to incorrect positioning.

4. Does the virtual array graphic contain stray lines?
   If the graphic file contains stray lines or irregular lines, these should be removed. Stray lines can affect the accurate positioning of the graphic, leading to errors in the processing position. Use graphic editing software to check and remove unnecessary stray lines, simplifying the structure of the graphic and ensuring only the necessary paths and elements are downloaded to the controller. After cleaning up stray lines, reconfigure the virtual array settings and download the graphic again.