Siemens V90 servo return failed

Abel

Catégories:

Moteur

Tags:

servo
Siemens

616

Voir la traduction

2023-03-03

Siemens servo homing failed. I am the disc homing. After I turn back, the zero position and the last homing position cannot coincide. The known reduction ratio is 1:20. Please tell me how to deal with it.

Cyril

2023-03-04

1. The acceleration and acceleration should be adjusted down
2. Check whether there is pulse loss online
3. Check if there are instructions interfering
4. Find a blank program and try again several times
5. Check whether there is a problem with the drive

Voir la traduction

Répondre

Recommandations pertinentes