Français
  • A while back LB crashed while editing nodes. Since then, i CANNOT drag N drop ANY type of file into the open program. I even uninstalled and re-installed.Not a nubie. Is there a configuration file that can be edited?Win 11 workstation40GB RAM2 2GB SSIDsproblem started with v 1.3 , im now on 1.4 and it still happens.TIA

    2023-05-27
    490
    1
    0
  • Am I correct in thinking that if you create a design and add manual tabs, if you then duplicate this using the array tool, the tabs are not copied?I’m doing a large layout, and filling it using the array tool… When the array is complete, and I select all, then hit the Tabs button, the only item showing tabs is the original one I used t...

    2023-05-27
    276
    1
    0
  • I’m totally new. I have an Atomstack A5 PRO. When I turn on the power, the laser lights up and it immediately goes to the lower left corner. This model has no limit switches, so it will set there and grind away. I kill power right away, but am unable to perform anything with the software because it can’t communicate with the machine.I s...

    2023-05-27
    415
    1
    0
  • In my case it’s my Atomstack A10Pro. Connects no problem and will start to run a project, but randomly stops mid-project. Lightburn will still report “Busy” and no information about the stop on the console.

    2023-05-27
    441
    1
    0
  • how can I change the line thickness?for example: when I drew a line and I don’t want it to be so thick and almost Invisible?

    2023-05-27
    298
    1
    0
  • Coherent rings the opening bell at the New York Stock Exchange on May 23, 2023 at 9:26 a.m. Et to witness another pivotal moment!Coherent, A U.S. laser system solutions provider, announced on February 8 that it is transferring its common stock and 6.00% Class A mandatory convertible preferred stock from the Nasdaq Stock Market to the New York Sto...

    2023-05-26
    445
    1
    0
  • Since the early 20th century, quantum theory has made significant contributions to technological development. Despite the success of quantum theory, its applications are mainly limited to equilibrium systems due to the lack of a framework for non-equilibrium quantum systems. The production of ultrashort laser pulses and free electron accelerator X-...

    2023-05-26
    348
    1
    0
  • Developed by Fraunhofer ILT, the compact galvanoscope laser scanner is designed to accommodate new applications in 3D printing, micromachining or medical technology.According to the designers, the scanner occupies only 50 cubic centimeters and its architecture combines the scanner driver and mirror substrate, saving up to 90 percent of norm...

    2023-05-26
    268
    1
    0
  • Graphene was discovered in 2004 and revolutionized every field of science. It has significant properties such as high electron mobility, mechanical strength and thermal conductivity. A lot of time and effort has been put into exploring its potential as a next-generation semiconductor material, leading to the development of graphene-based transistor...

    2023-05-26
    311
    1
    0
  • How can I add new fonts to those fonts we already have in Lightburn?

    2023-05-26
    449
    1
    0
  • Have machine hooked up to a usb port still does not find it.

    2023-05-26
    383
    1
    0
  • I cannot get lightburn to engrave an image. If I use GRBL it will engrave no problem. In lightburn I get a gcode error. Any help would be great. Thanks, Dave

    2023-05-26
    260
    1
    0
  • If I enable this setting and set it to a high number, the preview shows a reduced processing time, but I’m not seeing anything speed up when the job is actually processing. It completes in the same amount of time as it did before. Does this function not work for gcode lasers? I have an xTools at the moment.Thanks.

    2023-05-26
    322
    1
    0
  • Good morning,I am building a homemade 60w CO2 laser machine and I would like to know if ligthburn is compatible with the RNR ecomotion board.If so, I can create and run g-code inside lightburn, without needing mach3, correct?And i need some special driver?Thanks a lot for the help.

    2023-05-26
    349
    1
    0
  • I am trying to get my words bolder by using offset and creating multiple offsets of say 1 mm. This will be still fast in line print.Certain letters (a, b, d, e, g, etc) have internal closed splines.Offset only seems to offset the outer shape of the letter, not the inner shape. How to do this. In a letter ‘e’ I cannot select the inside s...

    2023-05-26
    356
    1
    0