Please tell me how to deal with the servo hitting the limit during automatic operation?
2023-03-0885510The servo motor is used with the reducer, such as the planetary reducer. The reducer has a reduction ratio. The servo motor outputs the specified speed. After the reducer decelerates and increases the torque, will the speed accuracy of the output shaft of the reducer be improved? Or does the reducer affect the speed accuracy of the servo motor? Is ...
2023-03-041.1K10The reason why the motion control card cannot be connected
2023-03-041.4K10The response speed is a very important index to measure the motion control system. In addition to the response speed, there are also some important parameters related to product quality and production efficiency:1. The number of axes supported by the controller and the performance of multi-axis linkage and cooperation.2. Accuracy of...
2023-03-041.3K00Panasonic MSMF series servo motors, 50W and 100W are all suitable for the same type of drive. The original 50W motor is used, but now the 100W motor is replaced. Is its current, torque and other parameters adaptive? Does the torque monitor output signal including IM terminal correctly reflect the motor torque after replacement?
2023-03-021K10Laser week, we developed a new postprocessor for plasma bevel cutting machine, the control START Sharpon is used on it.Thanks for the new tool management feature involved in CutLeader V6, we could add severial tools with different bevel angle and the enty/exit radius.Based on the tool assignment rules, the bevel tool can be assigned to contour auto...
2023-02-2792820Hi all,I have a D.I.Y. build 130W with a Cloudray MYJG-150W.Everything has been running great for a few weeks and now the laser will only fire at 100%.Anyone able to help with this one?
2023-02-271K20can’t access laser control commands in device settings for Marlin. there is a line there but can’t open
2023-02-241.1K10I just cant work out the in and out pin assignments, some clarity would be awesome. I have 2 BOBs connected to my ESS. Number 1 BOB is 100% full with inputs and outputs. BOB #2 I have a bunch of pins but they are mostly all input pins shown on the ESS configuration page with just a few random ones being output pins.My question is pins 3,4,5 for ex...
2023-02-211K30I build an switch box for my Atomstack X20 (with updated firmware) with 2 Mosfet switches (with Optocouplers) to control the Air Assist (24V) and Enclosure Fan (12V). In Lightburn device settings Air Asist I have M7 activated. Measuring the I2C SCL signal on the controller there is no activity using M7 and M9 commands. Is there any way to control A...
2023-02-2098210Because the laser marking machine is based on the cooperation of X/Y galvanometer deflection to reflect the laser onto the worktable for accurate carving. The control of the galvanometer is controlled by the controller open-loop, so it must be linear, that is, the relationship between the input signal and the deflection angle is linear.Because the...
2023-02-201.1K101. As the key part of laser cutting equipment, motion control system has high reliability and real-time. It must ensure the fault-tolerant ability, and can self-correct the parameters, so that the system can operate normally and stably. At the same time, it must also meet the accuracy requirements of the system for real-time communication and have ...
2023-02-141.1K00The laser cutting machine system is generally composed of laser generator, (external) beam transmission module, workbench (machine tool), microcomputer numerical control cabinet, cooler and computer (hardware and software).1) Machine tool host part: the machine tool part of the laser cutting machine, the mechanical part that realizes the mo...
2023-02-131K00Laser processing equipment is a kind of intelligent numerical control machine tool. Its principle is that high energy density laser is irradiated on the material after being focused by the lens to quickly melt the vaporized material, so as to complete cutting, carving, marking, welding and other processing requirements. Compared with traditional pr...
2023-02-0491200Laser is a major invention in the 20th century and is known as "the fastest knife", "the most accurate ruler" and "the brightest light". After entering the 21st century, with the continuous development of technology, laser has gradually penetrated into all aspects of industrial production, and has a close relationship with us. Among them, laser mar...
2023-02-021.1K00
- Aucune donnée
Français
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski