Using laser cutting templates can produce precise works. You can follow the steps below to choose different materials and make small or large templates.Step 1: Obtaining the ArtworkThe first step is to choose the design, this can vary from making a business logo or creating some vector artwork for your stencil. Hopefully the business logo is a hi...

Clarence

10-11

178

0

2

Friends who use laser cutting for paper cards often encounter a problem: burning. How to avoid such problems from occurring? By following the steps below, a clean and non focal laser cutting effect can be obtained.Get the basics right by making sure your mirrors and lens are clean and correctly focussed. Use the shortest focal length lens you have...

roy

09-26

446

4

5

Calibration of the laser cutting machine is a crucial step in ensuring the accuracy and quality of laser cutting operations. Reverse calibration is a method for achieving perfect calibration, and in the following text, we will provide a detailed introduction to each step of the operation.TOOLS YOU WILL NEED:REVERSE ALIGNMENT TOOL: Select the lase...

Marshall

10-09

255

1

1

I encountered a problem using a laser cutting machine. Using an industrial chiller, everything is cooling properly and all shafts are working properly. I have used different files, even those I have already completed before. It is doing all the work, but there is no work. This machine is newly purchased, can't it break down?

Aaron

09-30

269

1

0

The control signal for both laser are on all the time. Lightburn shows laser 1 and 2 but it’s not turning off other laser. I still have TL voltage to power supply. I’m at loss as to what to do. I’ve tried RDWorks settings and Lightburn neither changes output. I know it’s something simple.

David

09-28

308

2

0

Hello, I am cutting extruded acrylic and the edges are very rough and appear to have little bubbles through out it. I've cut this stuff before with a great flame polished finish. Any advice on why this is happening?

Smith

09-29

256

1

0

During the use of laser cutting machines, many people are confused about the maximum laser cutting power for carbon dioxide glass laser tubes in order to maximize their lifespan?What Do You Need to Determine Your Max Power %?There is one item and one piece of information you need in order to accurately determine the maximum laser power % you can ...

Miller

09-29

240

0

0

I have purchased a laser (NUOF 40W laser module laser head 450nm TTL blue laser module) and plan to install it on my CNC machine. I replaced the firmware of the CNC machine.The CNC machine is working properly, but the laser cannot be turned on. There should be a fan inside the laser, but there should be no noise or other abnormalities.There are thr...

jessie

09-26

289

2

0

Compact, light, versatile – the TruMicro Series 2000Whether for structuring, ablating, cutting, or drilling: the laser has become an essential tool in micro-production technology. The fiber-based ultrashort pulse lasers in the TruMicro Series 2000 are distinguished by their compact and light design. Integrating the laser is made significantly easi...

Christian

09-19

453

0

0

The JPT-PS series picosecond lasers are based on the industry-leading amplification architecture for industrial picosecond lasers. Featuring a compact dual-cavity structure and a simple yet reliable electrical control design, they are engineered to meet the demands of 24/7 industrial-grade production as well as advanced scientific characterization ...

Nugent

09-17

384

0

1

Experimental and Mechanism Study of Efficient CFRPCutting Based on Continuous Wave Laser and Water Jet Guided Laser Combined TechnologyAbstractWith the extensive use of large-thickness carbon fibre reinforced polymer (CFRP) in aerospace, one of the key issues that need to be urgently addressed for thick CFRP is to improve the cutting efficiency. W...

Vasili

09-15

464

1

1

AbstractThe surface strengthening of ball valves faces challenges such as high dilution rate and grain coarsening. However, high-speed laser cladding (HSLC) reduces dilution rate by reducing heat input through high scanning rate, and refines grain size through rapid cooling. Therefore, in this work, WC composite coating was prepared on the surface ...

Vasili

09-13

505

1

1

Glory Photonics 300W Ultrafast Lasers are characterized by high average power, large single-pulse energy, narrow pulse width, and high repetition rate. Additionally, they feature customizable pulse width and optional picosecond/femtosecond modes, providing more possibilities for high-precision material processing. The modular design reduces system ...

Payson

09-09

417

0

1

Product IntroductionGlory Photonics kilowatt-class ultrafast laser UFL-1000 series combines high average power, large single-pulse energy, narrow pulse width, and high repetition rate. It also features customizable pulse width with optional picosecond/femtosecond modes, providing more possibilities for high-precision material processing. The modula...

Terrelle

09-08

484

0

0

System introductionThe system is mainly used for laser welding of components of wearable products.Equipped with a 5-dimensional electric platform, the system can realize the welding of multiple planes of components. It has obvious advantages for the welding of nonlinear components.The system is also equipped with CNC operating system, which is conv...

Clarence

09-04

586

0

0