When using the brush function to rotate the Z-axis instead of the U-axis for machining, there is always a gap reset action，

Ruddy

05-20

623

4

0

Including Q-switched nanosecond pulsed laser based on single oscillator scheme and picosecond and nanosecond laser based on traveling wave amplification scheme, which can realize infrared, green to ultraviolet laser output, suitable for glass, plastic, silicon wafer, PCB, ceramic marking, cutting and deep engraving applications of other materials....

Vasili

05-29

506

0

0

I am a novice, I tried to use an engraving machine to carve some patterns, but I found that the engraving machine did not carve in the correct direction of the pattern, but in the wrong direction. How can I change the setting? I use RDWorksV8 software

ElenaXavier

05-27

790

2

0

BWT Lightning series fiber lasers have good beam quality, and the beam can be focused close to the diffraction limit, which makes them perfect choices for precision processing. The two operation modes, CW and modulation, minimize heat-affected zone. Reliable performance, modular and all-fiber design, and robust case enclosing all optical and electr...

Payson

05-27

509

0

0

Buen día me pueden ayudar una máquina láser de 90cm x 60cm me sale en la máquina que el tamaño de trabajo es de 38cm x 30cm como puedo ponerla para 90x60

BFF58ACE

05-26

799

2

0

LTH-wUV38xFeature&BenefitSpatial coupling technology, the peak wavelength is 375nm;Light weight, compact structure and easy maintenance;Long life, more than 10,000 hours;Output power 3W/5W/10W/20W;High stability during life.Source: Literonics

Clarence

05-23

783

2

1

What version of RDworks is supposed to be used with this. I have v8.01.66 and am unable to connect via static wired ethernet or wifi. I can ping both ip's so I know it's online, just no software control via RDworks or lightburn

Colten

05-17

752

6

0

Feature&BenefitThe absorption rate on the highly reflective metal is 3 to 20 times that of the infrared laser;There is no spatter in the process of welding Cu, Au and AL metals, which improves the welding quality;The combination of blue laser and infrared laser can greatly improve efficiency and reduce costs.Source: Literonics

Terrelle

05-23

643

0

0

Handheld laser welding is another new application technology of laser. Its principle is to aim a highly energy dense laser beam at the material, thereby rapidly heating and melting the material locally, forming a welding interface, and ultimately achieving the welding effect. Handheld laser welding equipment mainly includes lasers, welding heads, c...

Jamie

2024-10-22

562

2

0

I use a new Monport 80w camera with RDC6442G.However, I hit autofocus in Lightburn or the Z-axis menu and the camera breaks. (This camera does not have a Z-axis limit switch).Can I disable the autofocus feature in the control panel or machine settings?I looked at the Ruida manual but it didn't help much with this problem.

ElenaXavier

05-15

794

1

1

The servo motor only moves in one direction,How should I handle it?

LWE

05-20

764

1

0

The 20W50uj infrared femtosecond laser adopts an all-fiber structure and an integrated sealed cavity, with stable performance and strong anti-interference ability. Narrow pulse widths and higher temporal quality are obtained with efficient dispersion management.Main features：User-friendly interfaceReal-time state monitoringHigh beam quality; Suit...

Nugent

05-10

584

1

0

Fault analysis:1. The installation path is not selected correctly2. No VBA plugin downloaded3. The VBA plugin version is incorrect compared to the CAD version Solution:The reinstallation path is correct. After checking, it was found that the CAD version sent was 2023 and the VBA plugin version was 2018, which caused the failure. After re downlo...

Abel

05-19

548

0

0

Frequency converters are widely used in modern industry, but sometimes there are occasional trips that cause inconvenience to production. Below, we will analyze the common causes of frequency converter tripping and provide corresponding solutions.Overload causes trippingOverload is one of the common causes of frequency converter tripping. When th...

Tory

01-14

1.2K

1

1

Fault analysis:1. No fan enabled2. Relay wiring is incorrect3. Layer setting issue Solution:The layer parameters are set to not blow air

Aaron

05-19

628

0

0