chanelink logo
CHANELINK
Español

HGTECH Laser's New Product Debuts at the 2025 Munich Shanghai Light Expo

811
2025-03-07 16:26:05
Ver traducción

New Product for Wafer Testing Probe Card Manufacturing Equipment Project

 


This project adopts vision guided laser precision cutting to separate the probe from the crystal disk, and then generate a product mapping image for use in the next process. When picking up the probe, multi-point reference surface fitting technology is used to achieve non-contact probe suction and avoid force deformation. After picking up the probe, posture correction technology is used to ensure that the probe is implanted into the fixture. Probe crystal disk size 8 ", thickness>20 μ m, cutting accuracy<10 μ m, heat affected zone<30 μ m, correction accuracy<2 μ m, implantation accuracy<10 μ m, welding accuracy XY<3 μ m, Z<8μm， Weld the maximum plate of 12 inches.

application area 
Electronic/Electrical/Semiconductor


New intelligent equipment for comprehensive printing and marking


The comprehensive printing and marking intelligent equipment is particularly suitable for the field of shipbuilding. Based on the assembly line method, it uses UV coding technology, combined with full format automatic 2D visual edge finding technology, under the control of MES system, and combined with dedicated control and programming conversion software, to achieve efficient printing of various display elements on steel plates in shipbuilding. The maximum printing width of the equipment is 5.5m, which can meet the printing needs of all steel plates in the shipbuilding process; The printing speed is fast, with a speed of up to 25m/min when used as an offline device. A steel plate with a size of 5.5 * 22m can complete all printing work in 53 seconds, which is more than 90% slower than traditional methods.

application area 
Tool manufacturing/engineering machinery

Recomendaciones relacionadas

  • China has successfully developed the world's first 193 nanometer compact solid-state laser

    The Chinese Academy of Sciences reduced the volume of the deep ultraviolet laser by 90% and achieved 193 nm vortex beam output for the first time. Professor Xuan Hongwen described "loading truck equipment into the car trunk". This technology enables a 30% reduction in the size of lithography features, breaking through the bottleneck of the 2-nanometer process. In the next three years, laser power ...

    03-24
    Ver traducción

  • Huagong Technology: Exploring the "Laser+" Strategy to Deliver the Powerful Productivity of Laser and Intelligent Manufacturing to Various Parts of the World

    What is the power of a beam of light? If light is used in the manufacturing field, its highest accuracy can reach one percent of the diameter of a hair thread, which is why it is called the "brightest light", "most accurate ruler", and "fastest knife". From airplanes and ships to kitchens and electrical appliances, lasers are widely used as advanced processing tools in all aspects of equipment man...

    2023-10-12
    Ver traducción

  • Infinira launches an optical solution for 1.6 Tbps ICE-D data centers

    Infinira, an expert in optical network solutions, announced the launch of a high-speed data center optical transmission module based on single-chip indium phosphide (InP) photonic integrated circuit (PIC) technology. The company claims that the module will connect at a speed of 1.6 terabits per second (Tb/s), while reducing the cost and power consumption per bit.Yingfeilang stated that its data ce...

    2024-03-18
    Ver traducción

  • Researchers treated MXene electrodes with lasers to improve lithium-ion battery performance

    Researchers at King Abdullah University of Science and Technology (KAUST) in Saudi Arabia have found that laser scribing or creating nanodots on battery electrodes can improve their storage capacity and stability. The method can be applied to an alternative electrode material called MXene.Lithium-ion batteries have multiple drawbacks in a wide range of applications, and researchers around ...

    2023-08-04
    Ver traducción

  • Van's updates the manufacturer of laser-cut parts

    Van's Aircraft has responded to reports of ruptured dented parts found in AirVenture's latest kit. These defects are caused by external suppliers changing the process of laser cutting parts. From February 2022 to June 2023, Van's moved some parts from traditional punch manufacturing to an outside supplier that can laser cut rivet holes. The move is designed to increase the company's throughput and...

    2023-08-04
    Ver traducción