Español

The United States has successfully developed a full 3D printed electric spray engine

590
2025-02-20 15:02:34
Ver traducción

The fully 3D printed electric spray engine is suitable for small satellite in orbit maneuver, and its production cost is only a small part of that of traditional thrusters.


Image source: Massachusetts Institute of Technology, USA


The Massachusetts Institute of Technology team recently demonstrated an electric spray engine made entirely of 3D printing technology, which can be propelled by emitting droplets. This innovative device not only produces quickly, but also has a much lower cost than traditional thrusters. It utilizes commercially available 3D printing materials and technology, and can even complete printing in space. The relevant paper was published in the journal Advanced Science.

The working principle of the electric spray engine is to apply an electric field to the conductive liquid to generate a high-speed micro droplet jet to propel the spacecraft. This type of micro engine is particularly suitable for small satellites, such as cube satellites. Compared with chemical fuel rockets, electric spray engines are more efficient in the use of propellants, so they are more suitable for performing precise in orbit maneuver tasks. Although the thrust generated is small, the required thrust level can be achieved by paralleling multiple electric spray launchers.

The team has developed a modular process that combines two 3D printing methods, solving the challenges encountered in manufacturing complex equipment composed of macroscopic and microscopic components. They use restoration photopolymerization printing (VPP) technology, including digital light processing technology, to shine light onto photosensitive resin through a chip sized projector and solidify layer by layer to form high-resolution 3D structures. In addition, they also designed a clamping mechanism to connect various components, ensuring the water tightness of the equipment. This allows astronauts to directly print satellite engines in space without relying on equipment sent from Earth.

The printed thruster contains 32 electric spray emitters, which work together to ensure stable and uniform propellant jet. The final prototype equipment is comparable to or even better than existing equipment in terms of thrust performance.

Further research has shown that by adjusting the pressure of the propellant and the voltage applied to the engine, the droplet flow rate can be controlled to achieve a wider range of thrust output.

The researchers said that this method simplified the system design, reduced the complex pipeline, valve or pressure signal network, and provided a more portable, economical and efficient electric spray propulsion solution.

The 3D printed electric spray engine can almost mark an important breakthrough in space propulsion technology. Due to its ability to produce quickly and customize, it can quickly adjust designs according to specific needs in space missions, greatly improving execution flexibility and response speed. Especially in emergency repairs or the need for rapid deployment of new satellites, this immediate production capability is particularly important. Being able to directly manufacture engines in space means that future space missions will no longer rely solely on equipment sent from Earth, but will be able to self repair and upgrade in orbit. Therefore, this innovation not only significantly reduces production costs and time, but also brings more flexible and efficient solutions for future space exploration.

Source: laserfair

Recomendaciones relacionadas
  • Tower Semiconductor is preparing to add laser integrated PIC for Scintil

    Grenoble stated that in the context of growing demand driven by artificial intelligence and 5G, "key" milestones have strengthened its supply chain.Scantil Photonics, a subsidiary of CEA Leti that focuses on silicon photonics, has stated that its integrated laser design is now being produced by Tower Semiconductor, a wafer foundry partner.This method describes this development as a "crucial step f...

    2024-02-29
    Ver traducción
  • The influence of post-processing methods on the fatigue performance of materials prepared by selective laser melting

    Researchers from Opole University of Technology in Poland have reported the latest progress in studying the effect of post-processing methods on the fatigue performance of materials prepared by selective laser melting (SLM). The related research was published in The International Journal of Advanced Manufacturing Technology under the title "Influence of post processing methods on fatigue performan...

    01-17
    Ver traducción
  • Analysis of Development Prospects and Technological Trends in the Optical Industry

    As a core supporting field of modern technology, the optical industry has broad and diversified development prospects, benefiting from the cross drive of multiple emerging technologies. The following is a systematic analysis from the perspectives of technology trends, application areas, challenges, and opportunities: Core driving forces and growth areas1. Optical communication and 5G/6GDemand ex...

    04-30
    Ver traducción
  • The influence of laser beam drift on SLM thin-walled TC11 specimens at high scanning speed

    AbstractDue to the width of the laser melt pool and the sintering effect on the surrounding powder, the experimental size of the selective laser melting (SLM) sample will be larger than the design size, which will greatly affect the dimensional accuracy and surface quality of the thin-walled sample. In order to obtain SLM thin-walled TC11 specimens with precise dimensions, an orthogonal experiment...

    02-24
    Ver traducción
  • Lithuanian and Japanese researchers develop silver nanolaser

    Recently, researchers from Kaunas University of Technology (KTU) in Lithuania and the Tsukuba National Institute of Materials Science in Ibaraki, Japan, have collaborated to successfully develop a new type of nanolaser based on silver nanocubes.Although its structure is small and can only be observed through high-power microscopes, its potential application prospects are broad, and the research te...

    2024-12-24
    Ver traducción