Español

Shanghai Optical Machinery Institute has made progress for the first time in hard X-ray zoom beam imaging

962
2024-04-08 15:04:58
Ver traducción

Recently, the High Power Laser Physics Joint Laboratory of Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, completed the research of hard X-ray zoom beam splitting imaging on the micro focus X-ray source for the first time, and solved the problem of beam splitter limitation in the hard X-ray band. The related achievements are titled "Bifocal photo scene imaging in the hard X-ray region" and published in Optics Letters.

The Fresnel zone plate was proposed in 1818 and successfully applied in X-ray focusing research in the 1960s. The emergence of photonic screens in 2001 provided a device choice for high-performance focusing of X-rays beyond zone plates. However, traditional zone plates and photon sieves have single focal characteristics and cannot meet the beam splitting requirements of shortwave diffraction imaging and interferometric sensing. With the solution of the problem of high coherence shortwave light sources, the demand for X-ray beam splitters has become more urgent.

Researchers used the ancient Greek ladder sequence to encode traditional photon sieves and optimized the design of a hard X-ray bifocal photon sieve. With the help of Professor Chen Yifang's research group at Fudan University, the device was processed and tested, as shown in Figure 1. By using copper foil to filter the microfocal X-ray source, a spectral line with a half width of 0.0242 keV and a center of 8.39 keV was obtained, with the X-ray source mainly concentrated at 7.38 keV, 8.39 keV, 9.67 keV, 9.96 keV, and 11.29 keV. On this basis, equal size imaging experiments were conducted on the dual focus photon sieve, which were recorded by X-ray CCD, as shown in Figures 2 and 3. The experimental results show that regardless of whether it is long focus or short focus imaging, the images recorded by the detector during the forward and backward movement process first decrease and then increase, fully proving that the dual focus photon screen achieves zoom beam splitting imaging. The emergence of hard X-ray beam splitters has expanded new development space for applications such as variable resolution diagnosis of laser plasma, X-ray microscopy, and beam splitting coherent diffraction imaging.

The relevant work has been supported by the National Natural Science Foundation of China, the Chinese Academy of Sciences strategic leading science and technology special category A and other projects.

Figure 1: Double focal photon sieve, (a) under optical microscope, (b) under scanning electron microscope, (c) under minimum hole, (d) under gold height

Figure 2 Experimental results of telephoto imaging, where (a-i) the detector gradually approaches the image plane and then moves away from it

Figure 3 Experimental results of short focus imaging, (a-c) detector gradually approaches the image plane and then moves away from the image plane

Source: Shanghai Institute of Optics and Mechanics

Recomendaciones relacionadas
  • Lumibird signs a 20 million euro contract to provide laser rangefinders for airborne defense applications

    Recently, European laser technology leader Lumibird announced the signing of a major contract to provide laser rangefinders for airborne defense applications.The contract is worth approximately 20 million euros, adding to Lumibird's existing business in laser rangefinders. It covers the supply of over 100 laser rangefinders over a three-year period starting from the third quarter of 2024, as well ...

    2023-10-01
    Ver traducción
  • The L4 Aton laser at Eli Beamlines achieves an output power of 5 petawatts

    According to the Extreme Light Infrastructure (ELI), the L4 ATON kilojoule laser at the ELI beamline facility in Dolní Břežany near Prague, Czech Republic, has achieved peak powers exceeding 5 petawatts (10¹⁵ W).The research institute stated: “This confirms that L4 can operate safely and reliably at this energy level, which is crucial for scaling up power and preparing for scientific experiments.”...

    10-28
    Ver traducción
  • The improvement of additive manufacturing through artificial intelligence, machine learning, and deep learning

    Additive manufacturing (AM) has made it possible to manufacture complex personalized items with minimal material waste, leading to significant changes in the manufacturing industry. However, optimizing and improving additive manufacturing processes remains challenging due to the complexity of design, material selection, and process parameters. This review explores the integration of artificial int...

    02-24
    Ver traducción
  • Goethe, University of Central Florida research team showcases light and thin achromatic diffractive liquid crystal optical systems

    Headdisplay devices such as Apple Vision Pro, Meta Quest, and PICO are expected to completely change the way we perceive and interact with various digital information. By providing more direct interaction with digital information, MR has become one of the key driving forces for the metaverse, spatial computing, and digital twins, and has begun to be widely applied in fields such as intelligent tou...

    2023-09-26
    Ver traducción
  • Zhuoli Laser South Korea Branch Officially Opened

    In recent years, the performance of Chinese laser technology enterprises in the international market has become increasingly eye-catching. On September 20th, under the joint witness of nearly a hundred customer representatives from various industries in South Korea, the opening ceremony of Zhuolai Laser South Korea Branch was officially held.The branch is located in the Gyeonggi do region of south...

    2023-09-23
    Ver traducción