Español

Juguang Technology launches miniaturized high-power semiconductor laser stack GS09 and GA03

887
2023-12-15 14:13:47
Ver traducción

In today's technology field, Juguang Technology released two highly anticipated high-power semiconductor lasers on December 13th: GS09 and GA03. These two products are leading the innovation wave in the laser industry with their miniaturized design, excellent thermal management capabilities, and extensive customization flexibility.

GS09 revolutionizes chip spacing by compressing the width of the stacked light emitting region from 0.73mm to 0.43mm, supporting up to 10 bar of chip count and achieving an astonishing 1000W peak power output. And GA03 has made a breakthrough in size by significantly reducing the width from 18.2mm to 7.45mm, maintaining a single bar output power of about 200W and supporting laser peak output of up to 6000W.

GA03 optimizes the conduction structure to efficiently transfer heat from the chip to the cooling water channel, maintaining the same output power while extending the product's lifespan. Both products have achieved a sustained lifespan test of 10 ^ 9 pulses, providing users with a more reliable user experience.

These two products have excellent flexibility and can freely customize the number of bars and output power according to customer needs, suitable for various application fields. GA03 has been successfully applied in the high-power semiconductor laser side pump module SP series of solid-state lasers (DPSSL), demonstrating a peak pump power output of up to 5000W and excellent performance indicators, thus winning the 2023 Innovation Award.

The emergence of these two lasers will inject new vitality into the technology field, helping users achieve product designs with smaller sizes and higher power output, while reducing costs and bringing more efficient solutions to the photon application field. At this moment, Juguang Technology once again proves its leading position and determination to continuously innovate in the field of laser technology.

Source: Laser Net

Recomendaciones relacionadas
  • Shanghai Optical Machine has made progress in frequency shift of even harmonic of single layer MoS2

    Recently, the research team of the State Key Laboratory of High-Field Laser Physics at the Shanghai Institute of Optics and Fine Mechanics of the Chinese Academy of Sciences has made progress in using high-field lasers to drive the even harmonic frequency shift of single-layer MoS2. The results were published in Optics Express under the title "Frequency shift of even-order high harmonic generation...

    2023-09-07
    Ver traducción
  • Massachusetts University team achieves new breakthrough in photolithography chip

    Recently, a research team from the University of Massachusetts Amherst has pioneered a new technology that uses laser irradiation on concentric superlenses on chips to generate holograms, thereby achieving precise alignment of 3D semiconductor chips.This research result, published in the journal Nature Communications, is expected to not only reduce the production cost of 2D semiconductor chips, bu...

    2024-11-06
    Ver traducción
  • Guangfeng Technology releases the world's first versatile laser headlights

    On April 25th, 2024, the Beijing International Auto Show officially opened, and Guangfeng Technology released the world's first ALL-IN-ONE all-around laser headlights.This headlight is the first to integrate multiple functions such as high beam ADB headlights, color changing temperature headlights, fog lights, ground information display, car cinema, etc. into a small volume headlight module, achie...

    2024-04-29
    Ver traducción
  • Van's updates the manufacturer of laser-cut parts

    Van's Aircraft has responded to reports of ruptured dented parts found in AirVenture's latest kit. These defects are caused by external suppliers changing the process of laser cutting parts. From February 2022 to June 2023, Van's moved some parts from traditional punch manufacturing to an outside supplier that can laser cut rivet holes. The move is designed to increase the company's throughput and...

    2023-08-04
    Ver traducción
  • From Fiction to Reality: Laser Cutting Technology Has Entered the Shipbuilding Industry

    Laser cutting is a type of metal processing. In industry, there are three main cutting methods: mechanical cutting, thermal cutting, and a set of high-precision cutting methods. Laser technology belongs to the third category. The cutting in this method occurs due to the influence of the laser beam on the product. In fact, it is the molten metal produced by rapid pulse point melting and then blowin...

    2023-12-28
    Ver traducción