Español

Short pulse lasers in the form of chips use the so-called mode coupling principle

343
2023-11-10 14:56:31
Ver traducción

Nowadays, lasers that emit extremely short flashes can be found in many research laboratories, but they usually fill the entire room. Physicists have now successfully reduced this laser to the size of a computer chip. As they reported in the journal Science, their research can lay the foundation for extremely compact detectors.

A team led by Qiushi Guo from the California Institute of Technology in Pasadena has constructed their prototype semiconductor for short pulse lasers based on gallium arsenide, which is used to generate laser beams. They combined it with a crystal of another compound called lithium niobate, which is used as a conductor for light waves. Researchers arranged these two components on the basis of silicon and silicon dioxide to produce laser chips with a size of only a few millimeters.

Like other short pulse lasers, the new micro laser uses the so-called mode coupling principle: the light waves in the laser match each other in a mutually amplified manner, resulting in extremely short light pulses. Researchers successfully achieved this by applying high-frequency electric fields adapted to laser pulses. Previously, larger short pulse lasers also used this principle. But in the new laser, they cleverly arranged tiny waveguides so that they could keep the laser correspondingly small.

Trillionths of a second of short infrared flash
In testing, the prototype emitted short flashes of less than five picoseconds - millionths of a second infrared light. Their wavelength was 1065 nanometers and they repeated about 10 billion times per second. When doing so, the maximum power of the laser is half a watt, which is 500 times that of a traditional laser pen.

In the future, micro lasers can pave the way for small detectors, such as detecting bacteria and viruses in smartphones. They reflect the incident laser in a unique way, so they can be detected using highly sensitive sensors. Other applications lie in chips that use light to process digital data, making them faster than other systems. Even atomic clock lasers can be used in chip form. These can achieve accurate navigation without GPS signal, "Guo said. Considering these applications, researchers now hope not only to further increase the power of short pulse lasers, but also to make the optical pulses shorter - as low as a few femtoseconds.

Source: Laser Network

Recomendaciones relacionadas
  • Zhongke Yuchen laser welding technology opens up vast space for the welding process of new energy vehicle motors

    The application of laser welding technology in the welding process of new energy vehicle motors is a typical example of Zhongke Yuchen in many welding cases. The main accessories of the automatic laser welding equipment for new energy vehicle motors are imported products, and the welding process is mature and stable.Motor rotorMotor statorLaser welding of motor stator tapThe circumferential wel...

    2023-10-18
    Ver traducción
  • The breakthrough of coherent two-photon lidar overcomes distance limitations

    Schematic diagram of experimental setupNew research has revealed advances in light detection and ranging technology, providing unparalleled sensitivity and accuracy in measuring the distance of distant objects.This study was published in the Physical Review Letters and was the result of a collaboration between Professor Yoon Ho Kim's team at POSTECH in South Korea and the Center for Quantum Scienc...

    2023-12-08
    Ver traducción
  • TSMC's first European wafer fab receives € 5 billion subsidy for construction

    Recently, TSMC held a groundbreaking ceremony for its first European 12 inch wafer fab. It is reported that the European Union has approved Germany to provide 5 billion euros in subsidies for the factory.It is understood that TSMC's 12 inch wafer fab is located in Dresden, Germany and is called "European Semiconductor Manufacturing Company (ESMC)". In August 2023, TSMC announced a partnership with...

    2024-08-26
    Ver traducción
  • New type of metasurface with adjustable beam frequency and direction

    Recently, according to the journal Nature Nanotechnology, a team from the California Institute of Technology reported that they have constructed a metasurface covered with micro adjustable antennas that can reflect incident light beams: one beam of light enters and multiple beams of light exit, each with a different frequency and propagating in a different direction. This is a new method for proce...

    2024-07-30
    Ver traducción
  • The influence of post-processing methods on the fatigue performance of materials prepared by selective laser melting

    Researchers from Opole University of Technology in Poland have reported the latest progress in studying the effect of post-processing methods on the fatigue performance of materials prepared by selective laser melting (SLM). The related research was published in The International Journal of Advanced Manufacturing Technology under the title "Influence of post processing methods on fatigue performan...

    01-17
    Ver traducción