chanelink logo
CHANELINK
Español

SEMA 2023: Huali's Easy Level Floating Free Laser Fuel Level Transmitter

201
2023-11-03 14:51:33
Ver traducción

Winning the SEMA Best Engineering New Product Award is not an easy task. Therefore, it said a lot about Huali's new non floating fuel transmitter bringing hardware home. The Easy Level fuel level sender is a brand new design that does not rely on traditional float arm settings, but uses a frikken laser beam to measure the fuel level in the tank.

More precisely, Easy Level uses LiDAR technology to measure the distance between the fuel surface and the sensor unit, and then converts this distance measurement value into a signal that can be read by the fuel level gauge. It can be used with any aftermarket instrument, "said Steve Sparkman of Holley. It is not suitable for OEM instruments, but all aftermarket instruments - Classic Instruments, Dakota Digital, etc. - can be easily connected.

This sensor is suitable for tanks with depths ranging from 4 inches to 39 inches and can be set up outside the vehicle. By using the buttons on the device, you can set the empty and full positions before installation, and then set the same position on the instrument panel after installation. You can even adjust the damping rate of the reading through the DIP switch on the device to manage instrument bounce caused by fuel shaking.

This device is very compact and easy to install. It looks like a hockey ball, "Sparkman said. It has a laser that can shoot down and tell you where the fuel is. It's so simple. Installation is a simple task, including installing hardware and gaskets, as well as installing flange templates. The small bolt circle diameter of 2-1/8 inches hardly occupies space on the fuel tank, and the 12 volt PWM output signal makes sensor wiring easy.

Source: Laser Network

Recomendaciones relacionadas

  • A review of research on residual stresses in carbon steel welding

    Researchers from the University of Witwatersrand in South Africa have reported a review of research on residual stresses in carbon steel welding: formation mechanisms, mitigation strategies, and advances in advanced post weld heat treatment technologies. The relevant paper titled "A comprehensive review of residual stresses in carbon steel welding: formation mechanisms, mitigation strategies, and ...

    04-12
    Ver traducción

  • Lingke LP series industrial connectors provide fast, reliable, and efficient electrical connections for laser equipment

    Laser technology is currently a very mature technology and has been used on various laser equipment, such as laser cutting machines, laser projectors, medical laser equipment, etc. Advanced laser equipment requires high-performance and reliable industrial connectors to provide stable and safe power input and connection, which is one of the key links for the normal operation of laser equipment.Ling...

    2023-10-25
    Ver traducción

  • SuperLight Launches "First" Portable Broadband Laser

    Supercontinuum spectrum laser developer SuperLight Photonics has launched the so-called "first revolutionary portable broadband laser" - SLP-1000. Its wide spectral output provides a light source for industrial and medical imaging applications as well as spectroscopy.Supercontinuum spectrum lasers, also known as broadband lasers, provide high bandwidth while maintaining high coherence and low nois...

    2023-11-02
    Ver traducción

  • Smaller laser facilities use new methods to break records before proton acceleration

    The Helmholtz Dresden Rosendorf Center (HZDR) has made significant progress in laser plasma acceleration. By adopting innovative methods, the research team successfully surpassed previous proton acceleration records significantly.They obtained energy for the first time that can only be achieved in larger facilities so far. As reported by the research team in the journal Nature Physics, promising a...

    2024-05-15
    Ver traducción

  • CO2 laser cutting machine for battery shell shaped parts: an innovative tool in energy technology manufacturing

    The development of new energy technology has made battery technology the engine for advancing clean energy. In battery manufacturing, the cutting of battery shell shaped parts is a crucial step. CO2 laser cutting machines have become an innovative tool for promoting the development of this field due to their high efficiency and precision. This article will delve into the important characteristics ...

    2023-12-25
    Ver traducción