chanelink logo
CHANELINK
Español

Professor Wu Dong's team at the University of Science and Technology of China created a "dancing microrobot" using femtosecond laser composite materials.

246
2023-08-11 14:28:54
Ver traducción
It was learned from the University of Science and Technology of China that the team of Professor Wu Dong of the Micro and Nano Engineering Laboratory of the school proposed a femtosecond laser two-in-one multi-material processing strategy, manufactured a micromechanical joint composed of temperature-sensitive hydrogel and metal nanoparticles, and then developed a multi-joint humanoid micromachine with a variety of deformation modes. The results were published in Nature Communications.
 
In recent years, femtosecond laser two-photon polymerization, as a true 3D processing method with nanometer precision, has been widely used to fabricate various functional microstructures. These microstructures show broad application prospects in the fields of micro-nano optics, microsensors and micromachine systems. However, how to use femtosecond laser to realize composite multi-material processing and further build micro-nano machinery with multi-mode is still a great challenge.
 
According to the researchers, the femtosecond laser two-in-one processing strategy includes the construction of hydrogel joints using asymmetric two-photon polymerization and the deposition of silver nanoparticles by laser reduction in local areas of joints. Among them, asymmetric photopolymerization technology can produce anisotropy in the cross-linking density of the local region of the hydrogel micro-joint, and finally make the bending deformation controllable in direction and Angle. In situ laser reduction deposition can accurately process silver nanoparticles on hydrogel joints. These silver nanoparticles have a strong photothermal conversion effect, which makes the mode switching of multi-joint micromachines exhibit excellent characteristics of ultra-short response time and ultra-low drive power. 
 
As a typical example, eight micro-joints are integrated into a humanoid micromachine. Spatial light modulation technology is then used to achieve a multi-focus beam in 3D space, which in turn precisely stimulates each micro-joint. The cooperative deformation between multiple joints enables the humanoid micromanipulator to complete multiple reconfigurable deformation modes. Finally, the "dancing microrobot" was realized at the micron scale. As a proof of concept, by designing the distribution and deformation direction of the micro-joints, the double-jointed micro-robotic arm can collect multiple micro-particles in the same and different directions.
 
According to the researchers, the femtosecond laser two-in-one machining strategy can construct deformable micro-joints in various local areas of three-dimensional microstructures, and achieve a variety of reconfigurable deformation modes. In the future, micromanipulators with multiple deformation modes will show broad application prospects in micro-cargo collection, microfluidic manipulation and cell manipulation.
 
Source: Science and Technology Daily
Recomendaciones relacionadas

  • Progress has been made in the research of single shot characterization technology for complex combination laser pulses at Shanghai Institute of Optics and Fine Mechanics

    Recently, the research team of the High Power Laser Physics Joint Laboratory at the Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, has made significant progress in the study of single shot characterization technology for complex combination laser pulses. The research team utilized an improved broadband transient grating frequency resolved optical switch technology (T...

    03-24
    Ver traducción

  • Zeiss, a century old optical giant, has established the Optoelectronic Optics Division

    Recently, Carl Zeiss announced on its official website that it plans to launch a new strategic business unit, ZEISS Photonics&Optics, on October 1, 2024, with the aim of providing excellent optoelectronic and optical products and solutions to global customers. It is reported that starting from the 2024/25 fiscal year, Zeiss Group will establish a new business unit focused on optoelectronics...

    2024-05-28
    Ver traducción

  • A professor from Sun Yat sen University proposes a new clean energy technology for laser manufacturing

    Energy conversion technology is an important research direction in modern science and engineering. Scientists are exploring new catalytic chemical methods to achieve the conversion of energy chemicals, such as photocatalysis and electrocatalysis. However, these highly anticipated catalytic chemistry technologies still have some problems in practical applications, and there is still a certain dista...

    2024-06-13
    Ver traducción

  • High precision laser linkage platform to help precision processing

    With the trend of industrial intelligence and precision processing, the demand for laser precision processing in precision 3C industry, machinery and equipment, new energy vehicles and other industries has developed rapidly, making the application of laser processing technology in the industrial field more comprehensive promotion.Due to the inherent nonlinear characteristics between optics and sca...

    2023-09-11
    Ver traducción

  • Personnel changes at Optimax, a precision optical manufacturer

    On November 25th, Optimax, the largest precision optics manufacturer in the United States, announced the appointment of Joseph Spilman as CEO and Pete Kupinski as President. After developing a comprehensive succession plan, Optimax CEO Rick Plympton will retire along with President and Founder Mike Mandina.Mandina stepped down in 2021 and passed on the title of CEO to Spilman, strategically appo...

    2024-11-28
    Ver traducción