Argonne National Laboratory's Advanced Photon Source (APS) has announced that it has begun its long-planned comprehensive upgrade. In the process, the electronic storage ring at the center of the device will be removed and replaced with a state-of-the-art one that will make the synchrotron 500 times brighter. Brighter beams, making it promising to ...
2023-05-0824010GRBL config $25 and $24 set homing speed. $25 is homing seek speed in mm/min and is the speed used when first homing. $24 is homing feed speed also in mm/min and is the speed used during the second half of the homing cycle after the time the homing switches are actuated.
2023-05-0834010I have a problem with laser is not moving at all. I bought a new laptop then click Device and Find My Laser it was appear “GRBL” it seem not work right then click Create Manually it found 3 list GRBL… don’t know sure which one? mine is Atomstack A5 Pro 40W Laser Engraver machine to connected right one and still struggled wi...
2023-05-0828310Hi all,Lightburn has 3 ways to move the laser: either with the num keypad, with the move buttons on the move tab, or with the move tool.I have an Atezr laser, and I cannot find a convenient way to position the laser where I want. Should I move physically the laser head, and then “read position” ? I got a bluetooth num keypad to try top...
2023-05-0832910Hello. have Sculpfun S10 without endstopsWhen lightburn is finished with the burn, it backs about 15cm, and parks into the wall (“Ratschhh”), not good.I want it to stop immediately. How do I?i use “absolute coords -mode”
2023-05-0837410Hello groupers. I’ve been working with lightburn for over a year now and today I have a problem that I can’t solve. The situation forced me to install the program and reinstall it. After restarting the laser, it turned out that the burnt image is a mirror image of what is on the preview. Maybe someone from the group had this problem and...
2023-05-0841310I would like to be able to frame out the mustard colored box (see pic) with the output turned off so that it doesn’t print. I just want to print the blue. I haven’t had luck with this. Is there a way to do this?
2023-05-0835120The light is on and goes in the engraving axis but it doesn’t burn the photo…I also focused the lense to the right focus but no burning.
2023-05-0835110Photonis, a French manufacturer of optoelectronic detection and imaging equipment, announced the signing of a definitive agreement to acquire ProxiVision, a developer and manufacturer of UV detection solutions from Germany. The deal is expected to close in the coming weeks. Terms of the transaction, which is pending customary clearances and approva...
2023-05-0627410The LC15Dx laser scanner, manufactured by Nikon Metrology Industrial Metrology Business Unit (Brighton, Michigan, USA), is the global benchmark for the efficient measurement and detection of manufactured components, especially those with complex free-form geometry, such as turbine blades, orthopedic implants and complex plastic parts. Compatible wi...
2023-05-0628610The introduction of artificial intelligence and PICOSECOND LASER HIGH POWER technology in laser marking and engraving is expected to revolutionize the industry and greatly improve product efficiency and safety. Lasit is a leader in laser marking with an eye to the future.The laser marking and engraving industry is undergoing a radical transformat...
2023-05-0646610Laserworld has announced a complete shift to a waterproof design for its successful Purelight range. The new Purelight laser series is IP54 rated, out of the box, suitable for outdoor activities, they don't mind if it rains or not. The Laserworld Purelight series ranges in power levels from 5W to 50W laser power, and all units feature excellent bea...
2023-05-0646210Since yesterday I have had problems with the display of lines. I need the lines to create two-dimensional drawings for cutting.When I draw a line that starts from another line, this new line takes on the shape and colour of the old one and even links them together.Where and how can I undo this so that, for example, if I draw a red line and then a b...
2023-05-0640610I save this file with save as, but every time it puts layer green below, but it should be at the top, what am I doing wrong?? newest lightburn
2023-05-0634110I have a Lasermatic 10, 10W laser engraver and I’m running Lightburn 1.4.00. Lately, the projects haven’t been completing properly. The laser seems to be turning off when it should be engraving/cutting. It previews correctly in Lightburn. I ran a project twice with pretty much the same results. I slightly modified the second one to see ...
2023-05-0636210
- No hay datos
Español
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski