I'm hoping someone here can help me with a problem I'm having.  I turned on my system this morning and as the motors homed, they moved normally, when I tried to move the head to a location to start a job, the motors moved but were making a grinding sound and vibrated in the direction of motion.I then tried to fire the laser and got nothing fro...

RnR Laser

2024-08-01

827

2

0

Laser cutting of PVC has advantages such as high precision, fast speed, and beautiful edges. With the intelligent control system, processing tasks can be switched freely, and the processing method is flexible and highly automated. However, in order to achieve smooth processing without problems such as black edges, there are also some areas that nee...

Abel

2024-08-01

830

0

0

1. Check the load conditionFirstly, confirm if the load exceeds the motor's carrying capacity and check if there are any faults in the transmission mechanism and mechanical components. If excessive load is found, it is necessary to adjust the load or choose more suitable motors and drivers. At the same time, regularly maintain mechanical components...

Marshall

2024-07-31

794

1

0

Reflective film is a type of reflective film material made using microprism technology, synthetic resin technology, thin film technology, and other processes. Based on the principle of reverse reflection of light, reflective film can reflect the light emitted by the light to illuminate the direction of the light and remind relevant personnel of the...

Kevin

2024-07-31

723

0

0

1. Perforation problem of carbon steel thick plateThe issue of perforation time accounts for a large proportion in thick plate processing, and various laser manufacturers have developed their own perforation plans. The most representative one is energy perforation (blasting), which has the advantage of fast speed (1 second, taking t16mm as an examp...

David

2024-07-30

809

1

0

1. Carbon steelCarbon steel is generally cut using oxygen during laser cutting, which can be divided into positive focus cutting and negative focus cutting. The cross-section of positive adhesive cutting is a glossy or frosted surface, while when using high-power equipment, negative adhesive cutting can be used. The cutting section quality of mediu...

Tory

2024-07-30

904

0

0

1、 The optical path is not parallelDuring laser assembly, there may be situations where the optical path is not parallel, resulting in optical center deviation. In this case, it is necessary to readjust the optical path to make it parallel in order to solve the problem of optical center offset.2、 Lens wear and tearThe optical components in laser c...

Robert Evans

2024-07-29

994

1

0

1. The motor cannot startPossible reasons:Power failure or power not connected.Parameter setting error.External control signal issue.terms of settlement:Check if the power supply is functioning properly and ensure that it is connected.Check the parameter settings of the frequency converter to ensure compatibility with the motor.Check if the exter...

Henry

2024-07-29

1K

0

0

Controlling the focus in laser cutting usually involves the following steps: 1. Adjusting the laser beam: Firstly, it is necessary to adjust the output power and wavelength of the laser to ensure that the quality and intensity of the laser beam are suitable for cutting materials.2. Focusing lens: Use a focusing lens to focus the laser beam into...

Farouk

2024-07-26

879

1

0

1. It is necessary to clean the dirt on the machine tool and guide rail every working day to keep the bed clean. At the end of the day, turn off the air source and power, and at the same time, exhaust the residual air in the machine tool pipe.2. If leaving the machine for a long time, turn off the power to prevent non professionals from operating...

Jen

2024-07-26

855

0

0

Common faults of synchronous motorsAlthough synchronous motors can maintain high work efficiency in most cases, there may still be some faults, as described below:1. Power reduction: Due to the inability of the rotor to rotate synchronously with the power supply, it may result in a decrease in the output power of the synchronous motor.2. Vibrati...

55455rml

2024-07-25

954

1

0

Laser marking machines, as an important tool for improving product identification quality and production efficiency, are increasingly widely used in the manufacturing industry. Faced with numerous laser marking machine brands and models in the market, choosing a device that suits the needs of one's own enterprise has become an important task. This ...

RTP

2024-07-25

729

0

0

The automation and digital control of metal laser cutting machines are mainly achieved through the following key steps and technologies:1、 AutomationAutomatic loading and unloading system:The automated loading and unloading system can automatically feed the raw materials to be cut into the laser cutting machine and automatically take out the fini...

JOST

2024-07-24

823

1

0

Handheld laser welding machine, as an emerging welding tool, works by converting electrical energy into laser and melting the welding wire and base material through high temperature to achieve welding. The following are common problems and their solutions for this device:1. Excessive wear of the protective lens of the welding gun head: The protec...

Silvano

2024-07-24

745

0

0

Rotor and controller mismatch: The rotor and controller of a brushless motor need to be matched to ensure normal operation. If not matched, it may cause overload and short circuit, thereby burning out the motor.Overload: If the brushless motor suddenly encounters excessive load during operation, it will also burn out. This may be due to changes i...

이야기 너와

2024-07-23

995

1

0