Hello, I have recently had a problem with the autofocus of my Atezr L2 24w.When I use the “Autofocus” macro ([ESP500]), no particular problem on 3mm plywood but when it is necessary to do it on 6mm, the laser head continues to descend even if the micro switch is in contact with the board and it crushes it.As the problem is new (I had no problems 10...
2024-09-2828410I had a Creality Falcon Pro connected to LB. I just got an XTool D1 pro 10w. I cannot figure out how to connect the new laser to LB. This is my screen:
2024-09-2825710Hello. I turned my laser 90 degree counter clockwise yesterday on my work area now I can’t get my stored to match up and I can’t figure out how to swap my x/y axis is someone could please help. When I tried to invert them in the settings then my homing was off.
2024-09-2724710I have a ThunderLaser Nova 24. The head goes to the home position after the job has completed. If I am engraving in the bottom of a tray with say one inch sidewalls what would be the best way to instruct the head to stay within the confines of the tray when engraving is complete? Trying to avoid a head crash.Thanks to all!
2024-09-2627810Is there a way to change many shapes that are on one layer over to a different layer without having to highlight each one individually?
2024-09-2524410Can anyone help with auto air assist, I upgraded motherboard Atom stack to allow auto air on/off, it worked perfectly untill the last Light burn update, the on/off button in the cuts/layers is set ot on, is there something in the background that needs setting.
2024-09-2327220What I want to achieve is when I open LB the cut parameters are permanently assigned to the colours at the bottom of the screen.How do I do this?
2024-09-2428810Moving with the keypad either works fine, or doesn’t work at all. I feel like I must be missing something that enables it, but I haven’t found it yet. Any clues?
2024-09-2429610hello！I am running the SculpFun S30 Ultra 33W with (what I think is the info needed) [VER:1.1h.20230313:] [OPT:V,15,128]. I am running Lightburn 1.6.03 on a Macbook Pro M1. I can connect tio thge S30 with my USB serial. However, almost every time I try to connect via the Bluetooth option, the console reports that “Port failed to open - already in ...
2024-09-2327310My LightBurn program is not fill engraving correctly. Is there a setting that needs to be adjusted to remove the lines left in the engravings?I ran two identical tests back to back. 1 in LightBurn and 1 in XCS and the LightBurn test has lines all throughout and is very dark, whereas the XCS test looks good.LightBurn settings for the box with the ...
2024-09-2025020ALARM:9This is the message I’m getting.“Homing fail. Could not find limit switch within search distance. Defined as 1.5 * max_travel on search and 5 * pulloff on locate phases” Somebody Please HELP!
2024-09-2024820After installing a new X-tool D1 pro 20W, the laser will only frame and return to home. The laser never fires. I discovered the machine settings selection, under edit has disappeared. The Settings and Device setting selections are still there. How do I get back the Machine settings ???. I was already using and X-tool extended laser on this computer...
2024-09-1825810I am on the free trail version of lightburn, hoping to transition to lightburn fully (if all goes well), i am having trouble connecting the machine to the software (lightburn) via “find my laser” window and I don’t know the laser controller to do it manually, as the machine came with instruction manual that just refers to EzCad2 and no other descri...
2024-09-1829510I’m trying to use my rotary with Lightburn 1.6.03. However, when I try to set the steps per rotation and wheel diameter using a roller rotary, Lightburn will not save and store the settings. It will go back to the default settings. The roller rotary was working. What am I missing?
2024-09-1424620I am cutting out two plywood rectangles to be glued back to back using the same rectangle drawn in Lightburn but when I fit the plywood together, it does not line up square. What am I doing wrong? Thanks!
2024-09-1430620
- No hay datos
Español
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski