What is the best method to carve a white effect on glass using a 10W diode? What is the best way to achieve similar results using fast, high-power, low-speed, and low-power?

Nugent

hace 3 horas

2

0

0

I am getting a buffer message after pressing the start button. How do I clear it?

Tory

hace un día

51

1

0

Laser cutting of thick steel plates has become a part of daily manufacturing, but laser cutting of thick plates still faces some challenges: energy must penetrate deeply, molten material must be cleanly discharged, and the cutting edge must remain stable over long distances. The following are the main challenges faced by the workshop and mature sol...

Miller

hace 4 horas

33

0

0

I am upgrading the 10 watt laser to 40 watts. Both are diode lasers. I carved on maple and hardwood with a 10 watt laser at a speed of 1500 millimeters per minute and a power of 30%, and the effect was very good.When I receive a 40 watt machine, should I maintain the same processing speed per minute and only reduce the power by 1/4? That is to say,...

Christian

10-17

78

2

0

When I use lightburn, making a 10mmx10mm square really draws me a 18mmx18mm square, and I don’t know how to correct it.

Abel

hace 2 días

54

1

0

1. Introduction to the Flying Cutting Function of Laser Cutting MachineWhen laser cutting circular or parts with circular inner holes, the cutting method of moving the laser head from one part to another without lifting the head is called flight cutting, which can significantly improve cutting efficiency.2. Different Types of Laser Fly Cutting Fun...

Gilbert

hace un día

52

0

1

Can you give me some advice on paper carving? Less power? The main logo is a bit transparent, so we need a 'burnt paper'. Burning it will dirty the paper. Do you have any good ideas?

roy

10-16

98

2

0

In the metal manufacturing industry, laser cutting has become the default choice. Mastering the process control of laser cutting stainless steel and carbon steel can improve production efficiency and part quality.Choose the right laser family for the jobTwo laser technologies dominate industry use: fiber lasers and CO₂ lasers. For most modern shop...

Jen

hace 2 días

74

0

0

I want to use a metal plate to make a laser bed. What is the size of the hole?

Aaron

10-15

106

2

0

1. Introduction to laser cleaning parametersIn the application of laser cleaning, setting reasonable parameters is a key factor determining cleaning efficiency, surface quality, and overall process stability:WavelengthWavelength is the basic parameter for the interaction between the laser and the material being cleaned, and it directly affects the...

Marshall

10-17

71

0

0

I want to cut 15 mm and 18 mm plywood with my laser. Iv not been able to find the right speed and power to cut thru 15 mm and 18 mm plywoods.please help and tell what power and speed should I set to trhu these thicknesses without harming my laser.

Terrelle

10-11

183

3

0

In laser welding, the welding penetration depth (the depth at which the base metal completely melts and fuses) and aspect ratio (the ratio of weld depth to width) determine the quality and performance of the weld seam. Therefore, when analyzing and optimizing laser welding processes, weld penetration depth and aspect ratio are not only key indicato...

jessie

10-16

86

0

0

Laser welding joints are very important components, and the strength of the welding joint directly affects the performance and reliability of the product. Especially for applications in high stress or complex working environments. So how to optimize materials, processes, and designs to further improve the strength of welded joints? The following te...

Jamie

10-15

88

0

0

CO2 laser engraving machines are inevitably prone to malfunctions during use, and preventive maintenance is essential. Taking systematic preventive measures can minimize the occurrence of malfunctions and ensure the smooth operation of the laser engraving machine.CO₂ Laser Engraver Maintenance ChecklistBelow, we outline the necessary preventive ma...

Robert Evans

10-13

130

0

0

Color filling laser cutting technology can present beautiful color visual effects in your works. The following details each step, allowing you to create stunning colorful works.Step-by-Step Guide to the Color Fill Laser Cut ProcessStep 1: Create Vector FilesThe foundation of any laser cut project is a well-designed vector file. For this guide, we'...

Nugent

10-10

257

2

3