Belt transmission is one of the most widely used transmission methods in mechanical design. According to different belt structures, it can be divided into ordinary V-belts, narrow V-belts, combined narrow V-belts, multi wedge belts, ordinary flat belts, trapezoidal tooth synchronous belts, circular arc tooth synchronous belts, etc. The characterist...
2022-11-211.2K00In mechanical design, the knowledge of gear transmission occupies an important position. Gear transmission is a mechanical transmission that transfers power and motion by using the teeth of two gears to mesh with each other. Among all mechanical transmissions, gear transmission is the most widely used, which can be used to transmit the motion and p...
2022-11-2195500RDC6442 board, the model of the motherboard is 8.00.8, and the software is v8.0.20. After downloading the graphics to the motherboard, the panel fails to connect the device in the processing preview. How to solve this problem?
2022-11-171.1K10The circular cutting is not closed, the straight line is not straight, the XY axis jitters, and the servo driver is used.How to solve this problem?
2022-11-171.2K10The motor makes a noise, but the cutting head does not rise or fall. What is the reason?
2022-11-171.1K10How does VCutWork software set no tool lift at corners?
2022-11-171.4K10RDC6332M, when it can follow up, press the auto focus button, the laser head starts to descend, touches the iron plate, and then rises to the reference focus position, and then stops, without lifting up.What should I do?
2022-11-171K10The tool lift coordinate is set, but the tool is still lifted to the zero point coordinate during the cutting process.
2022-11-1796810Using V8 software, in user parameters, cutting parameters and idle acceleration are invalid after they are changed,how to solve?
2022-11-1789311In recent years, the application of laser cutting technology has developed very rapidly in China, and laser cutting equipment has formed large-scale production and application. But for the core high-end motion control system, many equipment manufacturers still rely on imported CNC systems.In order to break through the difficulties of foreig...
2022-11-211K00Principle of laser cleaningLaser cleaning is to use the characteristics of laser beam, such as large energy density, controllable direction and strong convergence ability, to destroy the binding force between pollutants and the matrix or to directly gasify pollutants to decontaminate, reduce the binding strength between pollutants and the matrix, a...
2022-11-211K00Laser light output control mainly uses GATE signal to control light output; The specific frequency, power and other parameters of the light output are controlled by PWM signal, mainly changing the frequency cycle and duty cycle in PWM.Duty cycle: the ratio of the time for holding high level in the output PWM signal to the time of the PWM cl...
2022-11-211.1K001、 Structure comparison of water cooling and air coolingAir cooling unit adopts air cooling mode (fan cooling); The water cooling unit adopts the cooling water cooling mode, and the water pump, cooling tower and circulating pipeline are used for circulating cooling of the unit.From the perspective of water cooling installation mode, it can be divi...
2022-11-1897900The operation of mechanical equipment will generate a lot of heat. In order to maintain the normal operation of the equipment, cooling measures must be taken. The current cooling system mainly includes water cooling and air cooling. In the field of laser marking, whether the equipment is cooled by water cooling or air cooling depends mainly on the ...
2022-11-1897000Water chiller is a kind of water cooling equipment, which provides constant temperature, constant flow and constant pressure. Its working principle is to inject a certain amount of water into the water tank in the chiller, cool the water through the chiller refrigeration system, and then transfer the low temperature cooling water to the equipment t...
2022-11-181.1K00
- No hay datos
Español
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski