chanelink logo
CHANELINK
Ελληνικά

Creativity Falcon 2 laser cutting machine will be launched in Germany equipped with a new 60W laser head

202
2024-05-29 14:50:08
Δείτε τη μετάφραση

Starting from June 20th, The Creativity Falcon 2 laser cutting machine will also be launched in Germany, equipped with a new 60W laser head. With this ability, fully encapsulated equipment can now also be carved into steel.

 


High power is achieved through twelve 5-watt laser diodes, whose beams are combined with each other. This will make it possible to cut 22mm thick lime wood and 30mm thick organic glass. According to the manufacturer, stainless steel plates can not only be carved but also cut 0.2 millimeters thick. For example, by turning off a single diode (through software), the laser power of sensitive materials can also be reduced. The cutting machine should belong to Laser Class 1.

For thinner materials, it is said that the cutting speed of the new laser head is more than three times faster, for example, the cutting speed of 5mm walnut plywood can reach up to 700 millimeters per second. Due to its high power, the material evaporates faster, resulting in almost no smoke generated at the cutting edges.

The shell comes with a prominent orange transparent cover, providing safety features in case of accidental opening. There is also a drawer at the bottom that can collect cutting waste and is easy to clean. The 1.6W laser head is also equipped with a laser cutting machine, which is said to be more suitable for fine carving.

Falcon2 60W is now available for booking with a discount of over 400 euros. At that time, its price was only 2439 euros, not 2872 euros. In addition to the second laser head, an air assisted compressor is also provided.

Source: Laser Net

Σχετικές προτάσεις

  • Low noise! Switzerland develops a new type of laser

    According to foreign media reports, scientists from the Physics Research Institute and the Institute of Physics and the Center for Quantum Science and Engineering at the Swiss Federal Institute of Technology Lausanne (EPFL) in Lausanne, Switzerland have made a new progress in the field of excitation science, developing a smaller and quieter laser system than previous products.Small laser system (I...

    2024-07-03
    Δείτε τη μετάφραση

  • German team develops and promotes laser technology for formable hybrid components

    Scientists from the Hanover Laser Center (LZH) in Germany are studying two laser based processes for producing load adapted hybrid solid components.From a transaction perspective, mixing semi-finished products can help save materials and production costs, but if the components that need to be replaced are made of expensive materials, these materials need to meet high requirements in future use, su...

    2023-08-16
    Δείτε τη μετάφραση

  • Oxford University Tokamak Energy Company develops laser technology for fusion power plants

    Tokamak Energy is currently developing a new laser measurement technology for controlling extreme conditions inside fusion power plants.The laser based dispersion interferometer system is being tested at the company's headquarters in Oxford and will be installed on its world record breaking fusion machine ST40 later this year.Clean, safe, and renewable nuclear fusion power generation occurs inside...

    2024-03-14
    Δείτε τη μετάφραση

  • Ruisheng Clyde Aerospace Company Commercializes TNO's Satellite Communication Laser Terminal

    AAC Clyde Space, a small satellite technology multinational company headquartered in Uppsala, Sweden, has obtained the right to manufacture and distribute laser satellite communication terminals using the optical technology of the Dutch research institution TNO.TNO's technology helps to transmit satellite generated data to Earth through lasers, with the potential to achieve high speed and security...

    2024-05-24
    Δείτε τη μετάφραση

  • Fulu and Longview begin design work on laser melting devices

    Longview Fusion Energy Systems and Fluor have taken another step towards commercialization of laser fusion power plants.According to the memorandum of understanding signed by the two companies, Fulu will design the factory for Longview Fusion Energy Systems. The two companies collaborated and signed a memorandum of understanding in 2023 to leverage Fulu's experience in developing and constructing ...

    2024-03-13
    Δείτε τη μετάφραση