Ελληνικά

Shanghai Optics and Machinery Institute has made progress in the research of new terahertz sources based on Yb lasers

387
2024-04-09 15:40:54
Δείτε τη μετάφραση

Recently, the State Key Laboratory of Intense Field Laser Physics of the Chinese Academy of Sciences Shanghai Institute of Optics and Fine Mechanics has made new progress in generating intense field terahertz waves based on Yb laser pumped organic crystals. The relevant research results were published in Applied Physics Letters under the title "Efficient strong field THz generation from DSTMS crystal pumped by 1030nm Yb laser".

Compared to inorganic crystals such as ZnTe and LiNbO3, organic crystals such as DAST and DSTMS have higher nonlinear coefficients and lower absorption coefficients in the terahertz frequency band. In previous studies, infrared ultra short pulse lasers with wavelengths ranging from 1200 to 1700nm were generally used to pump organic crystals for better phase matching and higher terahertz conversion efficiency. However, obtaining high-energy ultra short laser pulses in this band requires frequency conversion using techniques such as OP (CP) A, which not only greatly reduces energy conversion efficiency and system stability, but also increases equipment cost and complexity. In recent years, ultrafast Yb lasers have received attention from the scientific and industrial communities due to their advantages in low cost, high power, and miniaturization. The use of Yb laser to directly drive crystals to generate terahertz waves provides ideas for the development of integrated terahertz sources, as well as opportunities for the development of related scientific research and application fields.

This study elucidates the phase matching conditions for the generation of terahertz waves by organic crystal optical rectification pumped by ultra short pulse lasers, and analyzes the dependence of terahertz frequency, coherence length, etc. on the pumped laser. The research team utilized Yb laser pumped organic crystal DSTMS to generate strong field terahertz. By designing phase matching in the terahertz band and optimizing conditions such as pump laser pulse width and power density, a single pulse energy of 0.4 is obtained μ J. A strong field terahertz wave with a peak field strength of 236 kV/cm, covering a frequency spectrum of 0.1-6 THz, and a laser terahertz wave energy conversion efficiency of 0.22%. The above relevant experiments have verified the feasibility of Yb laser pumping organic crystals to generate milliwatt level high-power strong field terahertz waves, providing a new integrated terahertz light source scheme for scientific research and application promotion in related fields.

Relevant work has been supported by the national key research and development plan, the National Natural Science Foundation of China, and the Chinese Academy of Sciences instrument and equipment development project.

Figure 1. Generation and characterization of strong field terahertz waves (a) Experimental optical path; (b) Terahertz time-domain waveform and spectrum (illustrated as terahertz focal spot).

Figure 2. Laser terahertz wave phase matching (a) The refractive index of DSTMS crystal in the infrared and terahertz bands; (b) The dependence of terahertz frequency, coherence length, etc. on the wavelength of the pump laser; (c) The terahertz coherence length at a pump laser wavelength of 1030 nm; (d) The absorption characteristics of DSTMS crystals in the infrared and terahertz bands.

Source: Shanghai Institute of Optics and Mechanics

Σχετικές προτάσεις
  • Improved spectrometer color filter array for software calibration without the need for laser

    Hackaday will launch cool projects that may stimulate others to expand and enhance it, and even move in a completely new direction. This is the way the most advanced technology continues to evolve. This DIY spectrometer project is a great example of this spirit. It comes from Michael Prathofer, who was inspired by Les Wright's PySpectrometer, a simple device pieced together by a pocket spectrom...

    2024-05-28
    Δείτε τη μετάφραση
  • Understanding the "single-mode" and "multi-mode" in cleaning lasers in one article

    In industrial production, cleaning is a crucial step. Traditional cleaning methods, such as mechanical cleaning and chemical cleaning, although can meet production needs to a certain extent, often have problems such as low flexibility and environmental pollution. With the advancement of technology, laser cleaning technology has emerged as a new favorite in the cleaning field due to its high effici...

    05-14
    Δείτε τη μετάφραση
  • Laser Photonics wins a large order from Lufthansa Technologies subsidiary

    Recently, American laser cleaning system developer Laser Photonics announced that the company has successfully secured an order for a cleaning technology laser cleaning system from Lufthansa Technik Puerto Rico, a technology subsidiary of Lufthansa, the largest aviation group in Europe.Lufthansa Technik is the world's largest independent provider dedicated to providing maintenance, repair, and com...

    2023-12-19
    Δείτε τη μετάφραση
  • Investing nearly £ 520 million, this synchrotron light source in the UK will be upgraded

    Recently, the UK's national synchrotron "Diamond Light Source" announced an investment of nearly £ 520 million ($648.3 million) to implement three new flagship beam lines and upgrade existing beam lines. This comprehensive upgrade will be delivered by 2030.The Department for Science, Innovation, and Technology and the biomedical charity Wellcome jointly approved the facility upgrade project,...

    2023-09-27
    Δείτε τη μετάφραση
  • BOFA launches the latest generation of high-temperature 3D printing filtration technology

    BOFA has consolidated its position as a market leader in additive manufacturing of portable smoke and particle filtration systems with the latest generation of 3D PrintPRO technology designed specifically for high-temperature processes.3D PrintPRO HT focuses on the 230V market and can filter high-temperature particles, gases, and nanoparticles emitted during polymer processing in the printing room...

    2024-04-15
    Δείτε τη μετάφραση