Ελληνικά

Using a new type of ground laser to track space debris

202
2024-03-14 14:39:54
Δείτε τη μετάφραση

The Polish Space Research Center of the Celestial Geodynamics Observatory located in Borowitz near Poznan will enhance its capabilities with a new and powerful laser.

The first task of this state-of-the-art device is to enable researchers to accurately track the trajectories of 300 previously identified space debris in no less than six months.

Observatory Director Pawe ł  Lejba emphasized the importance of this upgrade, saying, "Thanks to funding from the Ministry of Science and Higher Education, we are able to purchase high-power, pulsed, and nanosecond Nd: YAG lasers along the integrated optical laser rangefinder system, which is being developed directly at our laser station, which is part of the Borowitz Celestial Geodynamic Observatory CBK PAN.".
Space debris, especially in low Earth orbit, has become an increasingly challenging issue. Approximately 30000 fragments larger than 10 centimeters were also discovered in the orbital belt less than 2000 kilometers from the Earth's surface.

They travel at a speed of about 7 kilometers per second, threatening major objects such as satellites and the International Space Station. The International Space Station orbits the Earth at an altitude of approximately 400 kilometers and flies around the Earth about 15 times a day.
The European Space Agency reported that in 2022 alone, 2409 payloads were sent into orbit. Most of them are small satellites designed to burn out when they re-enter the atmosphere in two years. With the continuous expansion of commercial space activities such as StarLink Internet satellite system, the number of man-made objects around the earth is growing rapidly.

In 2009, the Iridium 33 satellite collided with the Russian Cosmos 2251 satellite, marking the first such disaster in history, resulting in the complete destruction of both satellites and the production of over 700 pieces of debris.

In order to mitigate this risk, the Inter Agency Space Debris Coordination Committee was established in 1993. It issued guidelines stating that inactive satellites must be removed from orbit within 25 years after the completion of the mission. This directive aims to prevent the so-called Kessler syndrome, where the density of objects in space is so high that collisions between fragments will lead to a series of further collisions.

The new laser at Borowiec station is funded by a 2.3 million zloty grant, provided by Eurotek International headquartered in Warsaw, and is a key tool to address this challenge. It will be put into use in the second half of 2024 and will provide accurate information on the quantity and orbit of space debris to support efforts to clean up space. Its detection system allows for the reception of photons sent by lasers to objects located in Earth's orbit. When the beam of light reaches the tracked object, it bounces off the object and returns to the rangefinder, allowing for precise determination of the object's height and velocity relative to the Earth.

Since the 1980s, the Borowiec laser station has been a part of the Astro Geodynamic Observatory and a member of the International Laser Ranging Service. It conducts laser measurements of the distance to artificial satellites and space debris on Earth, making it a unique institution in Poland.
The observatory also has a time laboratory, one of the three stations of the country's most accurate atomic clock and the large international radio telescope LOFAR.

Source: Laser Net

Σχετικές προτάσεις
  • Laser based ultra precision gas measurement technology

    Laser gas analysis can achieve high sensitivity and selectivity in gas detection. The multi-component capability and wide dynamic range of this detection method help analyze gas mixtures with a wide concentration range. Due to the fact that this method does not require sample preparation or pre concentration, it is easy to adopt in the laboratory or industry.Gas analysis is crucial for determining...

    2024-01-03
    Δείτε τη μετάφραση
  • BLT launches a new BLT-S800 metal PBF 3D printer equipped with 20 lasers

    Bright Laser Technologies (BLT), a global leader in additive manufacturing headquartered in China, has launched a new BLT-S800 metal 3D printer with a super large construction volume (800 mm x 800 mm x 600 mm) and a 20 fiber laser configuration, which can shorten part delivery time and achieve rapid customer manufacturing.The BLT-S800 system supports titanium alloy, aluminum alloy, high-temperatur...

    2023-10-19
    Δείτε τη μετάφραση
  • Luxiner launches LXR ultra short pulse laser platform

    Luxiner, the global leader in laser technology, has launched LXR ® The ultra short pulse (USP) laser platform is a revolutionary leap in industrial laser processing. The LXR platform provides unparalleled performance, versatility, and reliability, making significant progress in burst mode processing. Micro Miracle MasterThe world of miniaturization is flourishing due to the continuous improvemen...

    2024-06-11
    Δείτε τη μετάφραση
  • Photonic time crystals triggered by laser pulses may open the door to a new branch of optics

    When scientists discovered that laser pulses can rapidly cause refractive index changes in the medium, resulting in "photonic time crystals (PTC)" in the near-visible light band, the door to a disruptive new application in optics seemed to quietly open.Scientists have a certain degree of understanding of photonic crystals and time crystals, the two have almost nothing in common, the basic common p...

    2023-09-07
    Δείτε τη μετάφραση
  • Xinjiang Institute of Physical and Chemical Technology has established the largest database of computational nonlinear optical crystal materials to date

    Modern laser technology urgently requires nonlinear optical materials that can generate coherent light through second harmonic generation. However, only a small portion of the nonlinear optical properties of non centrosymmetric crystal materials have been experimentally or theoretically studied, and exploration for high-performance nonlinear optical crystal materials is still very limited.Recentl...

    2023-10-24
    Δείτε τη μετάφραση