Ελληνικά

High Power Laser Assists Scientists in Discovering a New Stage of High Density and Ultra High Temperature Ice

538
2023-10-11 14:38:26
Δείτε τη μετάφραση

As is well known, the outer planets of our solar system, Uranus and Neptune, are gas giants rich in water. The extreme pressure on these planets is 2 million times that of the Earth's atmosphere. Their interiors are also as hot as the surface of the sun. Under these conditions, water exhibits a strange high-density ice phase.

Researchers have recently observed one of the stages, called Ice XIX, which is the first to use high-power lasers to reproduce necessary extreme conditions. The Neptune model shows the potential depth of the newly discovered body centered cubic superion ice XIX. It can explain Neptune's multipolar magnetic field (purple), which is due to an increase in conductivity and tilt relative to the axis of rotation (green).

Image source: SLAC National Accelerator Laboratory
Researchers measured the Ice XIX structure under extreme conditions using a linear accelerator coherent light source (a groundbreaking X-ray laser device) and found that oxygen atoms are arranged in a body centered cubic structure, while hydrogen atoms move freely like fluids, greatly improving conductivity. Their paper is published in the Science Report.

Voyager 2 is a solar system exploration spacecraft launched by NASA in 1977, which measured the extremely unusual magnetic field around Uranus and Neptune. Scientists believe that the strange states of so-called superionic ice are a possible explanation, as the conductivity of these states increases. This work proves the existence of the previously undiscovered Ice XIX phase. It indicates that the phase can be formed at the correct depth and helps to interpret the Voyager 2 magnetic data.

Water is a common compound in the solar system and essential for life. It exhibits an exceptionally complex pressure temperature phase diagram, with 18 crystalline ice phases identified. There is no more important dense ice phase than the interior of gas giants such as Uranus and Neptune. Scientists speculate that the complex magnetic fields of these planets are generated by the strange high-pressure state of water ice with superionic properties. However, under these extreme conditions, the structure of ice is difficult to measure.

Researchers have found the first direct evidence for the use of extreme condition instruments using linear accelerator coherent light sources, ultra fast X-ray free electron lasers, and Department of Energy (DOE) science office user facilities to detect the new stage of high-density ultra-hot water ice in laser driven dynamic compression processes.

At 200GPa (2 million atmospheres) and 5000K (8500 ° F), this new high-pressure ice phase (known as Ice XIX) has a body centered cubic (BCC) lattice structure. Although other structures are theoretically stable under these conditions, the BCC structure of Ice XIX will increase the conductivity inside the ice giant much deeper than previously thought.

These results provide an important and convincing origin for the multipolar magnetic fields measured by the Voyager 2 spacecraft on Uranus and Neptune.

Source: Ofweek


Σχετικές προτάσεις
  • The Trends and Challenges of the Metal 3D Printing Industry in 2025

    In the past decade, metal 3D printing technology has experienced rapid development, from the initial production of orthopedic implants to the manufacturing of rocket boosters. This technology has become an indispensable part of multiple key industries. With the advancement of technology and the expansion of the market, we are witnessing the revival of electron beam melting (EBM) technology and the...

    01-21
    Δείτε τη μετάφραση
  • Snapmaker introduces new 20W and 40W laser modules

    Snapmaker has opened pre-orders for 20W and 40W laser modules, which are significant upgrades to the modules available on existing Snapmaker machines.Snapmaker says that with the 40W module installed, you will be able to cut 15 mm basswood plywood at a time at a speed of 20 mm/SEC. With 20W, you will cut 10mm at a rate of 10mm/SEC. That's a lot more than Artisan and Snapmaker 2.0 - both are comp...

    2023-08-04
    Δείτε τη μετάφραση
  • Jingyi Optoelectronics launches a transmittance detector to detect the near-infrared transmittance characteristics of plastic materials

    Laser welding plastic transmittance tester is an important industrial testing equipment used to measure the transmittance of plastic after welding, in order to evaluate welding quality and product performance. With the widespread application of plastic products in various fields, the requirements for plastic welding quality and transparency are also increasing. Therefore, laser welded plastic tran...

    2024-04-11
    Δείτε τη μετάφραση
  • Due to breakthroughs in microchip photonics, microwave signals have now become very accurate

    Zhao Yun/Columbia Engineering Company provided an advanced schematic of a photonic integrated chip, which aims to convert high-frequency signals into low-frequency signals using all optical frequency division.Scientists have built a small all optical device with the lowest microwave noise ever recorded on integrated chips.In order to improve the performance of electronic devices used for global n...

    2024-04-01
    Δείτε τη μετάφραση
  • Breakthrough in Silicon Based Room Temperature Continuous Wave Topological Dirac Vortex Microcavity Laser

    With the explosive growth of data traffic, the market is extremely eager for hybrid photonic integrated circuits that can combine various optical components on a single chip.Silicon is an excellent material for photonic integrated circuits (PICs), but achieving high-performance laser sources in silicon still poses challenges. The monolithic integration of III-V quantum dot (QD) lasers on silicon i...

    2023-10-26
    Δείτε τη μετάφραση