Ελληνικά

The ECSTATIC fiber optic project worth 5.1 million euros aims to prevent bridge collapse

794
2025-08-18 10:25:32
Δείτε τη μετάφραση

A new European research project is exploring whether the same fibre-optic cables that carry our internet could also serve as real-time sensors for hidden damage in infrastructure, including bridges, railways, tunnels and energy pipelines.

 


The €5.1 million ECSTATIC project, coordinated by Aston University in the UK, is trialling this breakthrough approach in a major UK city, using a heavily-used railway viaduct as its first live test site. The goal is to detect subtle structural shifts, stress, and vibrations in real time, using laser light pulses sent through fibre-optic cables already embedded right beneath our feet.

“Our aim is to create a global nervous system for critical infrastructure,” said Prof. David Webb, ECSTATIC project coordinator. “We are hoping to turn existing fiber-optic cables into a 24/7 early-warning system, detecting the tiniest tremors or stress fractures before they become catastrophic. If successful, it will be the difference between fixing a fault and cleaning up a tragedy.”

Light listens

Installing physical sensors across entire transport and energy networks would cost billions and cause major disruption. But the ECSTATIC project is taking a different route: it uses the infrastructure that’s already in place.

At the project’s first demonstration site (a major 19th-century rail viaduct carrying tens of thousands of trains per year), researchers will send ultra-precise laser pulses through buried fiber-optic cables. As trains pass overhead, the fibers subtly flex and vibrate. These movements change how the light behaves inside the cable, altering the phase and polarisation of the light, creating an optical fingerprint of the forces acting on the structure.

By measuring these changes and interpreting them using a new dual-microcomb photonic chip and AI signal processing, ECSTATIC aims to pinpoint early warning signs of damage or fatigue. Significantly, it works without interrupting internet traffic and without laying a single new cable.

“Cracks in bridges, viaducts, or tunnels don’t announce themselves; structures wear down gradually and silently, with the first signs of failure remaining invisible until it’s too late,” added Prof. Webb. “The UK and many places across Europe have hundreds of ageing railway bridges, with millions of vehicles passing under or over them each year. Many of the UK bridges date back to Victorian times, which could present a ticking time-bomb unless we take decisive steps to monitor them now.”

Preventing disasters

The need for early-warning systems is clear from recent bridge collapses in Europe that have cost lives and paralysed cities. In Italy, the Genoa Morandi Bridge disaster in 2018 killed 43 people when a 200-meter section of highway collapsed, despite internal warnings about structural risk years earlier. As recently as last year in Germany, the Carolabrücke in Dresden – a vital lifeline for the city – partially collapsed without warning. The incident severed critical utility lines, leaving parts of the city without hot water for several hours and triggering widespread transport disruption.

These events, though rare, reveal how vulnerable infrastructure can become when ageing structures are left unchecked, and how devastating the consequences can be. ECSTATIC aims to help authorities act before warning signs become disasters, by giving them better data, earlier, and without the need to install costly or disruptive new sensor systems.

With more than five billion kilometers of optical fiber installed across the globe, the potential for ECSTATIC’s technology is enormous, say its partners. If the trials in the UK prove successful, the approach could be rolled out across Europe’s transport and energy networks, enabling safer, smarter infrastructure monitoring at a fraction of the cost of traditional systems.

The project runs until July 2028. It brings together 13 partners from across Europe, including universities in Padova, L’Aquila, Chalmers, Alcalá, and West Attica, alongside industry groups Telecom Italia Sparkle, OTE Group, Nokia, Network Rail, MODUS, and Swiss SME Enlightra SARL, as well as the Greek seismology specialists NOA.

Dates for Photonics Partnership Annual Meeting 2026 announced
Photonics21, the European photonics industry platform, has announced that the Photonics Partnership Annual Meeting 2026 will take place will at the DoubleTree by Hilton Brussels City hotel on 9 & 10 June 2025. Next year’s event will focus on photonics in the next EU Framework Programme and will present the new Photonics Strategic Research and Innovation Agenda (2026) to the European Commission.

Photonics21 invites the industry in Europe to “take the opportunity to get the latest updates on the next EU Framework Programme and to network with your peers from the European photonics community.” The draft event programme as well as the link to the online registration and any further information will be published on the photonics21 website within the next months.

Source: optics.org

Σχετικές προτάσεις
  • Mears Machine Corporation achieves breakthrough in large-scale powder bed laser manufacturing

    Mears Machine Corporation has achieved a global breakthrough by manufacturing the world's largest single unit unwelded powder bed laser components. More details about this revolutionary manufacturing solution will be revealed in the coming months. "This milestone unlocks a new era in large-format metal additive manufacturing," said James Lloyd, CEO of Mears Machine Corporation. "We can now deliv...

    11-08
    Δείτε τη μετάφραση
  • Optimizing the phase focusing of laser accelerators

    With the help of on-chip accelerator technology, researchers at Stanford University are getting closer to manufacturing a miniature electron accelerator that can have various applications in industrial, medical, and physical research.Scientists have proven that silicon dielectric laser accelerators can now be used to accelerate and limit electrons, thereby producing concentrated high-energy electr...

    2024-02-29
    Δείτε τη μετάφραση
  • JMP: Small hole mode swing laser welding of nickel based high-temperature alloys - simulation, experiment, and process diagram

    IntroductionThe small hole mode swing laser welding has gained increasing recognition due to its ability to bridge gaps, refine microstructures, and enhance the mechanical properties of welds. However, the effects of amplitude, frequency, welding speed, laser beam power, and beam radius on heat flux distribution, melting mode, and three-dimensional temperature field have not been well understood. ...

    04-11
    Δείτε τη μετάφραση
  • Scientists at Peking University invent ultra-thin optical crystals for next-generation laser technology

    BEIJING, Dec. 19 (Xinhua) -- A team of Chinese researchers used a novel theory to invent a new type of ultrathin optical crystal with high energy efficiency, laying the foundation for next-generation laser technology.This photo taken on Dec. 15, 2023 shows a Twist Boron Nitride (TBN) crystal placed on a piece of fused silica in Peking University, Beijing, capital of China. A team of Chinese rese...

    2023-12-20
    Δείτε τη μετάφραση
  • Another blockbuster acquisition! The two equipment makers announced a merger to focus on laser construction

    Recently, RDO equipment announced the completion of its acquisition of Rocky Mountain Transit&laser, expanding the construction technology solutions, services and expertise of John Deere construction and Wirtgen group in eight stores in Idaho, Wyoming and Utah, RDO acquired the stores in December 2023.Adam Gilbertson, senior vice president of field technology and innovation at RDO, said the ac...

    2024-05-31
    Δείτε τη μετάφραση