I am having trouble with PNG files when I run a test I get this:

Patrick

2024-01-06

519

1

0

Hi all and thanks for your help.I created this logo for my, to be started up, engraving business. How do I get it from Lightburn to JPG or PNG? When I export it as SVG and open in Canva or Photoshop, is has the construction lines that serve as toolpaths for the text. I have tried to use “Content Aware Tracing Tool” but it makes a mess ...

Nugent

2024-01-05

483

1

0

I’m a newbie. Lightburn finds my Ortur Lasermaster 2 Pro S2 but won’t connect.The Laser panel indicates “Ready”. The Console displays “Waiting for connection …” twice, and then about a dozen "G0"s.The Move panel is dead - won’t move the laser head.However, Lasergrbl is able to operate the laser. I ca...

Vasili

2024-01-05

448

1

0

How do I reset Lightburn back to factory settings?

Payson

2024-01-05

396

1

1

The biopharmaceutical sand mill is a commonly used mechanical equipment, widely used in industries such as pharmaceuticals, chemicals, and food. The sand mill generates a large amount of heat during operation and requires refrigeration equipment for cooling in order to operate normally. Therefore, using a chiller as an auxiliary refrigeration equip...

Clarence

2024-01-04

431

1

0

Dear friend ! I managed to activate the license code in LightBurn. I was very happy about that. As a beginner, I have been familiar with LightBurn for a few days, but I managed to stop it so that it no longer executes any commands. Please help me to restore the software to its basic state, starting from scratch. reset.Unique assembly hobby laser en...

Gilbert

2024-01-04

555

1

0

I’m making jigsaw puzzles using a Atomstack A5 Pro. When using LaserGRBL I can cut my material at 100% 500 mm/min 4 passes. When using the same settings in Lightburn it is nowhere near cut. Is there some other setting I’m missing? The only difference I see is that LaserGRBL passes the entire drawing 4 times where Lightburn passes each l...

Cyril

2024-01-04

412

1

0

Hi, I'd like to add an extra 230Vac FAN to our lasercutter. The fan may only be active when the lazer itself is also active (cutting or scanning) When the proces is finished, the fan has to stop as well. In other words, the fan will only worg when there is a production of smoke. Any idea how I can control this?

DcoscfnG

2023-12-28

436

4

0

I just purchased the latitool laser. GRBL. I have a Mac book pro as well as a windows computer. Tried setting the laser up on both computersI follow all the instructions and have set the laser up with the x axis 400 y axis 400 and 0,0 is at the front left bottom corner.When the machine homes it goes up to the top left corner and grinders for atleas...

Williams

2024-01-03

419

1

0

I have watched the video tutorial showing how to use Print and Cut to create alignment marks to break a project into multiple parts. Brilliant feature! But as a noob I have a couple of questions:Am I correct in thinking that the laser must have limit switches so the controller can determine the absolute position of the laser?Assuming this ...

Abel

2024-01-03

469

1

0

A chiller is a type of cooling water equipment that can perform refrigeration, temperature control, and constant flow. It is widely used in various industrial and commercial fields, such as the chemical industry; Plastic products, plastic containers, film making, plastic steel profiles, pipes, wires, cable sheaths, tire industry; Electroplating and...

Kevin

2024-01-02

356

1

0

Hi guys,I’ve read multiple questions about this already, but all were already a few years old, so here I go:What’s currently possible with Lightburn automation?I’m looking for ways to automate a process: open Lightburn, import an image on a particular position on the x/y-axis and deform the image based on predetermined coordinates...

Keegan

2024-01-02

468

1

0

I just installed my LightBurn camera, got it calibrated and it works fine. But, When I first open Lightburn and go to the Window menu, select camera control, it does not open. I’ve selected, unselected several times and still doesn’t work.Help!, please.

David

2023-12-29

489

1

0

HiSince a few days, Lightburn switches off the positioning laser on my iKier K1 when I run framing. I believe this has been since 1.4.04 release. Was there any change or do you have any idea how to fix this?

Jamie

2023-12-29

408

1

0

I have orders for some coasters. I’m using a 10w laser. I select the coaster drawing and I unlocked the size. When I input the size in both with and height. I lock the paddle lock. I then move the object with my mouse. Why does the size change?Also when I select the object I’m engraving and click on FRAME, I have to reselect the same o...

Henry

2023-12-29

405

1

0