I’m making jigsaw puzzles using a Atomstack A5 Pro. When using LaserGRBL I can cut my material at 100% 500 mm/min 4 passes. When using the same settings in Lightburn it is nowhere near cut. Is there some other setting I’m missing? The only difference I see is that LaserGRBL passes the entire drawing 4 times where Lightburn passes each l...

Cyril

2024-01-04

849

1

0

Hi, I'd like to add an extra 230Vac FAN to our lasercutter. The fan may only be active when the lazer itself is also active (cutting or scanning) When the proces is finished, the fan has to stop as well. In other words, the fan will only worg when there is a production of smoke. Any idea how I can control this?

DcoscfnG

2023-12-28

856

4

0

I just purchased the latitool laser. GRBL. I have a Mac book pro as well as a windows computer. Tried setting the laser up on both computersI follow all the instructions and have set the laser up with the x axis 400 y axis 400 and 0,0 is at the front left bottom corner.When the machine homes it goes up to the top left corner and grinders for atleas...

Williams

2024-01-03

965

1

0

I have watched the video tutorial showing how to use Print and Cut to create alignment marks to break a project into multiple parts. Brilliant feature! But as a noob I have a couple of questions:Am I correct in thinking that the laser must have limit switches so the controller can determine the absolute position of the laser?Assuming this ...

Abel

2024-01-03

943

1

0

Hi guys,I’ve read multiple questions about this already, but all were already a few years old, so here I go:What’s currently possible with Lightburn automation?I’m looking for ways to automate a process: open Lightburn, import an image on a particular position on the x/y-axis and deform the image based on predetermined coordinates...

Keegan

2024-01-02

1.1K

1

0

I just installed my LightBurn camera, got it calibrated and it works fine. But, When I first open Lightburn and go to the Window menu, select camera control, it does not open. I’ve selected, unselected several times and still doesn’t work.Help!, please.

David

2023-12-29

1.2K

1

0

I have orders for some coasters. I’m using a 10w laser. I select the coaster drawing and I unlocked the size. When I input the size in both with and height. I lock the paddle lock. I then move the object with my mouse. Why does the size change?Also when I select the object I’m engraving and click on FRAME, I have to reselect the same o...

Henry

2023-12-29

879

1

0

The first Chanelink Halloween/Christmas series of activity--Laser Processing Art Carnival has finished the solicitation. There was a great response to the event and a large number of wonderful works were received, each one of which was excellent.The Chanelink team has selected the award works based on many dimensions, such as technological ...

CL001

2023-12-29

1.1K

1

4

I have seen others add 2 solenoids to CN1 so they have low pressure and high pressure air assist. They use pin 6, +24 for the + connection on the solenoids and then pin 5, wind for the - side of one solenoid followed by pin 4, status for the - connection on the other solenoid. Why is pin 1, - not used and are these connections correct?...

1SaaRNJb

2023-12-29

932

2

0

How often should I clean the lens of my diode laser and how do I know when to clean it?

Jen

2023-12-28

1K

1

0

I have purchased the Lightburn 5mp-150 with Aspect 1.333. The Camera selection help table indicated that the minimum mounting 8.75". I have the camera mounted at 11’ from the laser bed and it will not capture the dot pattern. It will capture the same pattern when I raise the camera to 12" or higher.I do not have the space to keep the camera a...

Liam

2023-12-28

997

1

0

My computer crashed while engraving earlier. Image had a 1 hour 15 minute time estimate. Same engraving this morning was close to that estimate. Trying to burn image this afternoon, estimate is not 1 hour 40 minutes. Laser head doesn’t change speeds when changing settings while doing test burns.Any ideas on what setting(s) need to looked at?

Christian

2023-12-27

843

1

0

In the early automation industry, motion control was mostly pulse control and analog control. Later, CANopen was developed, and various Ethernet buses emerged, such as EtherCAT, PROFINET, POWERLINK, SercosIII, RTEX, and so on.Why is EtherCAT developing so rapidly both globally and in China now, mainly reflected in the following five points:...

Nugent

2023-12-26

812

1

0

May I ask if you are planning to use a laser displacement sensor to scan the parts, and then use a servo motor with a grinding wheel to follow the contour of the parts for polishing? How should you configure the hardware?

Vasili

2023-12-26

900

1

0

I was wondering if anyone has successfully cut anything with the 5 watt creality laser module attachment not the table and laser, the actual unit that attaches to my 3d printer. If so what speed and how many passes?

Payson

2023-12-26

872

1

0