Hello all, I am looking to add a camera to my new OMTech and was wondering how I figure out what camera I need to get and where to mount it.I followed the steps in the software documentation and got a list of cameras that would work, but I’m unsure where I am supposed to measure from. According to a video I watched about the installation on ...
2023-03-2726510when I use my lightburn, i only use it for fill, offset fill and line. Now i have customers that want the image to cut. But when i look at the drop down menu, I dont see cut. i checked to see if the software was up to date which it is. Am I missing something?
2023-03-2734910I just received my Atomstack P9 M50. In Lightburn, when I click the arrow buttons the laser head is moving the wrong way in relation to the button that I click. Right arrow moves down, down arrow moves left, etc…I changed the origin several times and it’s still not helping. Can anyone help me figure this out?
2023-03-2744210Help! I will pay to have a telephone or whatever session with a member here for your knowledge to help! Heres my issue.Brand new K40 monport with lightburn. When I installed via find my laser, OR using a file from Louisiana hobby guy, either way it homes to bottom left and grinds creating an error. If I reverse Y in machine settings it will home t...
2023-03-2730810Want to know if running the servo motor at full speed all day without a fan will burn the motor?
2023-03-2732910Water - cooled chiller has been widely used in increasingly familiar industries. Its main role is to provide industrial chilled water for equipment and products, the water temperature requirements can be adjusted according to user requirements, but its accuracy can be more accurately controlled at ±1℃. However, during the operation of the un...
2023-03-2747500- ΛέιζερLPKF, a German laser maker, saw revenue increase by 32% to EUR124 million in fiscal year 2022
LPKF Laser, a leading supplier of innovative laser solutions in Germany, on March 23 released its annual report for the 2022 fiscal year ended December 31.According to the results, LPKF Laser & Electronics achieved consolidated revenue of €1.237 in FY2022 (FY2021: €93.6 million) and EBIT profit of €6.8 million (FY2021: &e...
2023-03-2734200 Today I am trying Lightburn for the first time and have encountered something I am not clear about…I have designed an object and cut it… But every time it doesn’t cut all the way through, so I have to keep coming back to the study and changing settings (speed and passes) and still can’t get there.Since my computer...
2023-03-2335210How to export DXF files but maintain the grouping. When I export DXF or SVG the grouping is removed. How to correct this
2023-03-2345710HiI have switched from diode to co2. I have many projects saved where the settings are mm/min for the diode. When I open these in the new c02 laser the speeds are still in mm/min . Is there a way to change the settings when reopening in the co2 version.Many thanks
2023-03-2337720I’m a new user, just installed an OMTech 130w CO2 running Lightburn on Mac Ventura via USB. All cutting is reversed along X axis no matter what I try. I’ve changed the origin in Device settings to each of the 4 corners but the cut is still reversed. Today I actually had the cut match the Lightburn screen but the machine control panel wa...
2023-03-2341210I’m new to laser but trying. I’m to a point where I don’t know which way to go. AFTER MUCH TRIAL AND ERROR I’m at this pointSettings are DITHER, DPI=254, CONTRAST=10, BRIGHTNESS=20, GAMMA=175, SPEED=55, POWER=55.In the pic on the left there is a glass of beer in her right hand – not visible in the burn on the right.Wha...
2023-03-2342010Similar problems here when trying to etch a ceramic tile…Attached the project file, gcode and photo of result.The extra thick lines near the centre were where the laser stopped the first time.
2023-03-2336710How many volts of electricity does a 3000 watt laser cutting machine use？
2023-03-2456730Is the laser head supposed to be straight or slightly slanted?My laser head got moved, and since then my machine is not cutting right. When I take off the nozzle it cuts great, but with the nozzle I need to keep raising the power. What can be wrong? It’s all aligned.
2023-02-2235420
- Δεν υπάρχουν δεδομένα
Ελληνικά
- English
- 简体中文
- 繁体中文
- Français
- Русский
- Italiano
- 日本語
- 한국어
- Português
- Deutsch
- Español
- Türkçe
- Ελληνικά
- Nederlands
- Tiếng Việt
- Polski