Deutsch

Shanghai Institute of Optics and Mechanics proposes a new scheme of Er doped silicate fiber as an extended L-band broadband amplifier

727
2024-06-05 15:03:58
Übersetzung anzeigen

Recently, Hu Lili, a research group of the Advanced Laser and Optoelectronic Functional Materials Department of the Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, proposed a new scheme based on field strength optimization of Er doped silicate fiber as an extended L-band broadband amplifier. Relevant research achievements were published in Optics Letters under the title of "Er doped silicate fiber amplifiers in the L-band with flat gain".

The rapid development of big data and artificial intelligence has put forward higher requirements for the capacity of dense wave division multiplexers (DWDMs) in the new generation of optical communication systems. Compared to the mature C-band (1530-1565nm) erbium-doped fiber amplifier (EDFA), the L-band (1565-1625nm) EDFA has become a new generation of scalable optical communication products. However, the development of L-band EDFA faces difficulties and challenges: the gain of Er-doped fibers is limited by low longwave emission cross-sections and severe excited state absorption, resulting in very small gains for wavelengths greater than 1600nm. Therefore, how to improve the long wave gain of Er doped fiber materials is a key scientific problem that urgently needs to be solved in L-band broadband amplifiers.

The research team proposes a new scheme of micro ion field emphasis control to enhance the gain and spectral shaping of Er ions in a silicate fiber matrix. The feasibility of using silicate optical fibers as long wave gain enhancing substrates for Er ions has been confirmed both theoretically and experimentally. This scheme has achieved significant improvement in L-band gain and optimization of gain flatness in Er doped silicate optical fibers. At the same time, by adopting an all fiber scheme with heterogeneous fiber fusion, only a 1.5m long silicate fiber is used. At the longest wavelength of 1625nm in the L-band, the gain coefficient is 4.7dB/m, which is better than the 0.3dB/m of quartz fiber. In addition, the gain flatness of the fiber in the L-band is 0.8dB, which is better than the 5dB of quartz fiber. Compared to quartz fiber, this fiber has a higher doping concentration, shorter usage length, and larger gain coefficient, providing key material support for the new generation of L-band EDFA.

This work has received support from the National Natural Science Foundation of China and national key projects.


Figure 1: L-band gain of Er doped silicate optical fiber

Source: Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences

Ähnliche Empfehlungen
  • 2026 SPIE Entrepreneurship Challenge Opens for Registration

    Applications are now open for the 2026 SPIE Startup Challenge. The annual entrepreneurial pitch competition is held by SPIE, the international society for optics and photonics, as part of SPIE Photonics West.In 2026, Photonics West will be held 17-22 January in San Francisco’s Moscone Center, with the SPIE Startup Challenge finals being held 20 January.The SPIE Startup Challenge is a competitive e...

    09-08
    Übersetzung anzeigen
  • Scientists from the SLAC National Accelerator Laboratory in the United States have launched the world's most powerful X-ray laser

    Scientists at the SLAC National Accelerator Laboratory have launched the world's most powerful X-ray laser, which will be used for in-depth atomic and molecular research.It is a significant upgrade to its predecessor, as its brightness has increased by 10000 times.The upgraded laser facility also uses superconducting accelerator components, allowing it to operate at low temperatures near absolute ...

    2023-11-17
    Übersetzung anzeigen
  • New laser technology can achieve more efficient facial recognition

    Recently, the latest research report from FLEET, an interdisciplinary research team in Australia, revealed a significant leap in laser technology, achieving unprecedented levels of spectral purity.Spectral purity, which refers to the degree of matching of a single light frequency (or color) generated by a laser, is an important indicator for measuring laser performance. By using a scanning Fabry P...

    2024-06-24
    Übersetzung anzeigen
  • Shandong Zhancheng Intelligent Manufacturing Laser Cutting Equipment is Popular Overseas

    The high-end laser cutting machine developed and produced by Dongying Lijin Zhancheng Laser Intelligent Manufacturing Company has become popular in overseas markets this spring. This equipment can not only use laser to quickly cut steel, but also freely swing on steel, "showing" beautiful pictures. The laser travels like a paintbrush flying, and the hard steel plate has been hollowed out into be...

    03-21
    Übersetzung anzeigen
  • Shanghai Photonics Corporation has made progress in laser welding of structural materials (Ni-28W-6Cr alloy) for new-generation molten salt reactors

    Recently, Yang Shanglu, a researcher at the Laser Intelligent Manufacturing Technology Research and Development Center of Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, has made new progress in laser welding of the fourth-generation reactor-molten salt reactor structural material Ni-28W-6Cr nickel-based superalloy.The research team applied the high power fiber ...

    2023-08-25
    Übersetzung anzeigen