Deutsch

Shanghai Optics and Machinery Institute has made progress in the research of new terahertz sources based on Yb lasers

387
2024-04-09 15:40:54
Übersetzung anzeigen

Recently, the State Key Laboratory of Intense Field Laser Physics of the Chinese Academy of Sciences Shanghai Institute of Optics and Fine Mechanics has made new progress in generating intense field terahertz waves based on Yb laser pumped organic crystals. The relevant research results were published in Applied Physics Letters under the title "Efficient strong field THz generation from DSTMS crystal pumped by 1030nm Yb laser".

Compared to inorganic crystals such as ZnTe and LiNbO3, organic crystals such as DAST and DSTMS have higher nonlinear coefficients and lower absorption coefficients in the terahertz frequency band. In previous studies, infrared ultra short pulse lasers with wavelengths ranging from 1200 to 1700nm were generally used to pump organic crystals for better phase matching and higher terahertz conversion efficiency. However, obtaining high-energy ultra short laser pulses in this band requires frequency conversion using techniques such as OP (CP) A, which not only greatly reduces energy conversion efficiency and system stability, but also increases equipment cost and complexity. In recent years, ultrafast Yb lasers have received attention from the scientific and industrial communities due to their advantages in low cost, high power, and miniaturization. The use of Yb laser to directly drive crystals to generate terahertz waves provides ideas for the development of integrated terahertz sources, as well as opportunities for the development of related scientific research and application fields.

This study elucidates the phase matching conditions for the generation of terahertz waves by organic crystal optical rectification pumped by ultra short pulse lasers, and analyzes the dependence of terahertz frequency, coherence length, etc. on the pumped laser. The research team utilized Yb laser pumped organic crystal DSTMS to generate strong field terahertz. By designing phase matching in the terahertz band and optimizing conditions such as pump laser pulse width and power density, a single pulse energy of 0.4 is obtained μ J. A strong field terahertz wave with a peak field strength of 236 kV/cm, covering a frequency spectrum of 0.1-6 THz, and a laser terahertz wave energy conversion efficiency of 0.22%. The above relevant experiments have verified the feasibility of Yb laser pumping organic crystals to generate milliwatt level high-power strong field terahertz waves, providing a new integrated terahertz light source scheme for scientific research and application promotion in related fields.

Relevant work has been supported by the national key research and development plan, the National Natural Science Foundation of China, and the Chinese Academy of Sciences instrument and equipment development project.

Figure 1. Generation and characterization of strong field terahertz waves (a) Experimental optical path; (b) Terahertz time-domain waveform and spectrum (illustrated as terahertz focal spot).

Figure 2. Laser terahertz wave phase matching (a) The refractive index of DSTMS crystal in the infrared and terahertz bands; (b) The dependence of terahertz frequency, coherence length, etc. on the wavelength of the pump laser; (c) The terahertz coherence length at a pump laser wavelength of 1030 nm; (d) The absorption characteristics of DSTMS crystals in the infrared and terahertz bands.

Source: Shanghai Institute of Optics and Mechanics

Ähnliche Empfehlungen
  • Relevant teams of the Chinese Academy of Sciences breakthrough the application difficulties of ultra compact gas laser system in special scenarios

    Recently, Liang Xu's team from the Laser Center of Anguang Institute, Chinese Academy of Sciences, Hefei Institute of Materia Medica, conducted research on corona discharge fluid control and its application in the gas laser system, proposed an electric field flow field coupling analysis model suitable for multi pin corona discharge scenarios, and revealed the flow velocity distribution characteris...

    2024-07-20
    Übersetzung anzeigen
  • Experimental verification of driving pressure enhancement and smoothing for hybrid driven inertial confinement fusion on a 100 kJ laser device

    The research teams from the Laser Fusion Research Center of the Chinese Academy of Engineering Physics, the Beijing Institute of Applied Physics and Computational Mathematics, Peking University, and Shenzhen University of Technology reported experimental verification of the driving pressure enhancement and smoothing of hybrid driven inertial confinement fusion on a 100 kJ laser equipment.The relev...

    2023-09-25
    Übersetzung anzeigen
  • Hanbit Laser Layout in Southeast Asia's Mid to Low End Market

    Hanbit Laser, a South Korean laser equipment manufacturer, has recently completed an important step in its strategic layout for the Southeast Asian market. Recently, the company officially opened a laser application center in Hanoi, Vietnam, and entered the local mid to low price equipment market by integrating laser technology and automation solutions. This is a substantial progress in implementi...

    02-26
    Übersetzung anzeigen
  • Photon automation expands through new laser application laboratories

    Photon Automation, Inc., headquartered in Greenfield, Indiana, has been committed to providing automated laser technology solutions since 2000. The company is pleased to announce the opening of its state-of-the-art laser application laboratory in Farmington Hills, Michigan. This 7400 square foot facility will be led by renowned laser physicist Dr. Najah George, who has over 35 years of extensive e...

    2023-09-01
    Übersetzung anzeigen
  • 3D printed nanocellulose for green building applications

    The hydrogel material made of nano cellulose and algae was tested as an alternative and more environmentally friendly building material for the first time. This study from Chalmers Institute of Technology and the Wallenburg Wood Science Center in Sweden demonstrates how to 3D print rich sustainable materials into various building components, using much less energy than traditional building methods...

    2024-02-19
    Übersetzung anzeigen