Deutsch

ELI and LLNL strengthen transatlantic large-scale laser cooperation

990
2025-07-09 10:33:21
Übersetzung anzeigen

Lawrence Livermore National Laboratory (LLNL) and the Extreme Light Infrastructure (ELI) European Research Infrastructure Consortium (ERIC) have announced that they have signed a new Memorandum of Understanding. This builds on their existing decade of strategic collaboration to advance high-power laser technology.

“We are looking forward to expanding our existing collaborations with ELI on areas such as ultrabright high-repetition-rate sources for enhanced radiography, fusion and plasma physics research,” said James McCarrick, LLNL program director for High Energy Density and Photon Systems.

“This includes developing technologies with multiple applications such as high-repetition-rate target systems and diagnostics that can survive sustained operation close to one of the highest intensity and highest average power lasers in the world.”

ELI and LLNL have a long-standing partnership that began with LLNL building and delivering the L3 HAPLS (High-Repetition-Rate Advanced Petawatt Laser System) to the ELI Beamlines Facility near Prague in the Czech Republic. L3 HAPLS is designed to deliver petawatt-class pulses with energy of at least 30 joules and durations below 30 femtoseconds, at a 10 Hz repetition rate.

The system is already extensively used, capitalizing on its reliability and high repetition rate, while a clear plan is in place to continue ramping up its performance toward the full technical design parameters. These capabilities are essential for driving secondary sources like electrons, ions and x-rays, and for advancing the understanding of laser-plasma interactions.

The L3 HAPLS is a central feature of ELI's scientific offerings and provides a powerful tool for exploring high-intensity laser experiments with relevant applications to fields like materials science, medical therapy and non-destructive analysis. It is also particularly well suited for exploratory research in laser-driven fusion.

ELI as ‘proving ground’
ELI also has already acted as a proving ground for LLNL machine learning and optimization technologies. Last year, LLNL researchers performed an experiment in cooperation with ELI staff that integrated machine learning and optimization technologies to enhance the performance of the L3 system. This effectively boosted precision and efficiency, paving the way for even greater advancements in high-power laser experiments and research. The success of this experiment opens new avenues in laser-plasma interaction physics.

The close cooperation with the U.S. scientific user community is evident in the growing demand for ELI’s facilities within the framework of ELI’s user program. With experiment proposal submissions increasing and a rising user base, the U.S. stands out as the country with the third-highest number of proposals in the past five mission-based access calls. This underscores the significance of transatlantic cooperation in advancing laser science and highlights the strong and ongoing engagement of U.S.-affiliated researchers in ELI’s user program.

“We are pleased to see the active engagement of U.S.-based researchers in experiments at ELI, leveraging the advanced technology, including the L3 HAPLS system,” said Allen Weeks, ELI ERIC Director General. “This collaboration exemplifies the strength of international partnerships in driving forward scientific research and technological advancements. Together ELI and LLNL are shaping the future of laser science.”

The new agreement lays the foundation for the exchange of staff, internship opportunities for students and postdocs and fostering a culture of knowledge-sharing and intellectual collaboration. These initiatives will not only strengthen the ties between the two institutions but also expand the scope of joint research initiatives. Through this continued collaboration, ELI and LLNL are committed to addressing the challenges of tomorrow and shaping the future of laser science and technology.

Source: optics.org

Ähnliche Empfehlungen
  • Jenoptik invests 100 million euros to open new factory

    On May 30th, Jenoptik announced on its official WeChat account that after approximately two and a half years of construction, its new factory in Dresden, Germany, with an investment of nearly 100 million euros, has officially opened. This is the largest single investment project in Jenoptik's recent history.Jenoptik President and CEO Dr. Stefan Traeger stated that this new factory will make Dresde...

    06-05
    Übersetzung anzeigen
  • HP100A-50KW-GD laser power detector for measuring extremely high power laser beams

    The HP100A-50KW-GD laser power detector is mainly designed for manufacturers of high-power lasers and laser systems, factories that use high-power lasers to cut thick metal parts, and military applications.The HP100A-50KW-GD adopts a gold reflector cone and a reduced back reflection geometry, which can capture 97% of incident light and process up to 50 kW of continuous laser power. The back reflec...

    2024-01-16
    Übersetzung anzeigen
  • Scientists have conducted a series of studies on the mechanical properties and flame retardancy of laser formed Ti40 flame-retardant titanium alloy

    Recently, Professor Huang Chunping's team from Nanchang University of Aeronautics and Astronautics conducted a series of studies on the mechanical and flame retardant properties of laser formed Ti40 flame retardant titanium alloy. The research team used typical Ti40 flame-retardant titanium alloy as the research object and prepared Ti40 flame-retardant titanium alloy using LSF technology. The micr...

    2023-08-15
    Übersetzung anzeigen
  • LOTMAXX Announces the Launch of a Multifunctional 3D Printer with Laser Cutting Function

    LOTMAXX has announced the launch of the ET model, a new type of 3D printer that can also be used as a laser cutting machine. According to the manufacturer, the core component is a fast direct extruder with a printing speed of up to 500 millimeters per second.LOTMAXX ET features an all metal casing with a printing volume of 250 x 250 x 265 mm. According to the announcement, as a special feature, th...

    2023-11-09
    Übersetzung anzeigen
  • Deere Laser's self-developed laser induced sintering technology, with LIF equipment orders exceeding 100GW in production capacity

    Recently, Deere Laser received mass production orders and bid confirmations for laser induced sintering (LIF) equipment from multiple top customers, with a cumulative production capacity exceeding 100GW.As an innovative technology iteratively developed by the company based on its own LIR technology and LIA technology, LIF technology has won industry recognition for its excellent efficiency improve...

    2023-09-18
    Übersetzung anzeigen