Deutsch

The research team at the University of Electronic Science and Technology of China has developed three innovative photonic devices

607
2025-05-30 10:55:47
Übersetzung anzeigen

Recently, Professor Nie Mingming from the Key Laboratory of Fiber Optic Sensing and Communication at the School of Information and Communication Engineering, University of Electronic Science and Technology of China, in collaboration with the University of Colorado Boulder, published a research paper titled "Cross polarized stimulated Brillouin scattering empowered photonics" in the top international journal Nature Photonics. For the first time, the cross polarized Brillouin gain characteristics in lithium niobate crystals were systematically revealed, and their efficient coupling mechanism with second-order nonlinearity was demonstrated. As a result, three innovative photonic devices were successfully developed, which can provide new solutions for next-generation optical communication, precision measurement, and quantum technology.

The strong gain characteristics of the cross polarized stimulated Brillouin effect in lithium niobate, combined with its ability to control multiple physical fields such as thermo optics and electro-optic, can provide a new design dimension for new light sources and photonic integrated chips. Three innovative devices have been researched and implemented. (1) Reconfigurable stimulated Brillouin laser: By utilizing the birefringence thermal optical effect and cross polarization stimulated Brillouin effect of lithium niobate crystal, it breaks through the limitation of traditional stimulated Brillouin lasers that are difficult to tune due to fixed cavity length, and achieves sub hertz narrow linewidth laser output with arbitrary wavelength adjustment. (2) Efficient mode converter: For the first time, the Brillouin enhanced four wave mixing effect inside the cavity has been achieved, and a multi-dimensional high-efficiency mode conversion device for polarization, transverse mode, and longitudinal mode has been developed. (3) Brillouin second-order laser and frequency comb: By utilizing the synergistic effect of cross polarization Brillouin effect and second-order nonlinearity, the near-infrared and visible dual band laser and frequency comb pumped by intracavity Brillouin laser have been achieved for the first time. With the maturity of thin-film lithium niobate photonics integration technology, it is expected to use the revealed cross polarization stimulated Brillouin effect to develop more innovative photonics devices in addition to the above-mentioned devices, achieve miniaturization and low-power operation on the chip, and bring changes to cutting-edge applications such as optical atomic clocks, high-precision gyroscopes, optical communication, and optical neural networks.

This study was supported by the National Natural Science Foundation of China and the Top Basic Research Achievement Cultivation Program of the University of Electronic Science and Technology of China.

Professor Nie Mingming from the University of Electronic Science and Technology of China is the first author and co corresponding author of the paper, while Professor Shu Wei Huang from the University of Colorado Boulder is the co corresponding author of the paper.

Source: Opticsky

Ähnliche Empfehlungen
  • The physicist who built the ultrafast "attosecond" laser won the Nobel Prize

    Pierre Agostini, Ferenc Krausz, and Anne L'Huillier won the award for their ultra short optical pulses, which made close research on electrons possible.Ferenc Klaus, Anne Lullier, and Pierre Agostini (from left to right)Image sources: BBVA Foundation, Kenneth Ruona/Lund University, Ohio State UniversityThis year's Nobel Prize in Physics was awarded to three physicists - Pierre Agostini of Ohio St...

    2023-10-09
    Übersetzung anzeigen
  • SpaceX will sell satellite lasers to competitors that can accelerate space communication

    SpaceX President Gwynne Shotwell stated at a meeting on Tuesday that the company has started selling satellite lasers for fast space communication to other satellite companies.SpaceX's thousands of Starlink satellites in low Earth orbit use inter satellite laser links to transmit data to each other in space at the speed of light, so that the network can provide more extensive Internet coverage wo...

    2024-05-10
    Übersetzung anzeigen
  • BMW uses WAAM 3D printing to optimize derivative designs

    BMW explained how to use WAAM (Arc Additive Manufacturing) starting from 2025 to manufacture lighter and stronger automotive components and reduce waste generation, in order to optimize the use of generative design tools.The demonstrated WAAM process uses aluminum wire raw materials directly deposited through laser welding heads, enabling automotive companies to manufacture lighter and more robust...

    2024-04-13
    Übersetzung anzeigen
  • Juguang Technology launches miniaturized high-power semiconductor laser stack GS09 and GA03

    In today's technology field, Juguang Technology released two highly anticipated high-power semiconductor lasers on December 13th: GS09 and GA03. These two products are leading the innovation wave in the laser industry with their miniaturized design, excellent thermal management capabilities, and extensive customization flexibility.GS09 revolutionizes chip spacing by compressing the width of the st...

    2023-12-15
    Übersetzung anzeigen
  • DustPhotonic is the first to develop an 800G silicon photonic chip

    Recently, DustPhotonics released a single chip 800G-DR8 silicon photonic chip for data center applications, which is an important milestone in practical photonics in data centers. The company claims that its single-chip solution provides high-performance and easy to implement solutions for system architects.DustPhotonics' 800G-DR8 photonic integrated circuit provides a single chip solution for fib...

    2023-10-13
    Übersetzung anzeigen