How do I set the origin on a Ruida 6445C controller and save it so the machine remembers the position? Is there a specific function for this, similar to the G24 or G25 commands used on CNC routers?
Can you answer this question?
Please write your answer to help those who have this question.
Accepted answerGo to menu "Origin setting" and enable the desired origin (e.g., Origin 1)
Press <Shift> + arrow keys to move the laser head to the target position
Press <Origin> to record the position, then press Enter to save
Select which origin to use at startup under "Start origin"
On my machine, I first use the arrow keys to move the laser head to the desired position. Once it’s in place, I turn off the X, Y, and laser controls using a separate switch. With the switch off, I use the arrow keys again to set the current position as “0” and “0” — the carriage doesn’t actually move during this step. After that, I turn the switch back on, and the carriage stays exactly where it is.
I’ve also noticed one important detail: after powering on the machine, I have to wait for the Ruida controller to finish its startup process before turning on the X/Y and laser switch. If I turn it on too early, the carriage will automatically move to the front-left corner instead of staying in place.
Have a similar question but can't find a solution? Post your own question and get help from the community.
Copyright © 2021 Shenzhen Chanelink Network Technology Co., Ltd. All Rights Reserved.
