Work standalone, integrated with height control, technology for metal cutting
Work standalone, 256M memory on board.
Support remote control box. Ethernet communication. U disk supported.
5.7” TFT display with control and number keys.
Control software, RDCutist. Support technology for metal cutting.
Support 6 axes. Integrated with height control. Precise height sensor.
Support Z axis height control automatically and support dynamic focus adjust.
Support jog/step mode ; auto-focus function.
Support frog jump mode and Flying cutting.
Support simplified Chinese, Chinese, English.
Switching power supply：24V, Drive capability is more than 3A; Working temperature：-10°C ~ 60°C; The device shell is reliably grounded:The grounding resistance is less than 4Ω
Support drawing tool, graphics transformation and group functions
Image contour extraction, hanging screen, brightness, contrast and sharpening processing
Support multi-layer parameter setting, IO linkage
Support software simulation processing
Support two-dimensional cutting, pipe cutting and flight cutting
Curve smoothing, shrinkage and expansion, backlash compensation, reverse engraving compensation, cutting order management, cutting direction management, setting of cutting start point, lead-in line, lead-out line, bridging and micro connection
Support simplified Chinese, traditional Chinese, English
RDC6563F Control system (set)
BWK301R wireless operation box*1
Wireless receiver and spiral antenna *1
USB adapter cable *1
Used to connect the machine housing and PC (USB communication)
Network cable *1
Used to connect the machine housing and PC (Network communication)
USB adapter cable *1
Used to connect the machine housing and U disk interface of the motherboard
USB adapter cable*1
Used to connect the machine housing and USB communication interface of the motherboard
Used to connect the machine housing and Main board's network communication interface
DB9 male to female magnetic loop*1
Panel and motherboard connection line
DB15 motor cable*4
Connect the controller to the driver of XYU axis
DB25 motor cable*1
Connect the controller and the driver of heigh controller